In this review, we will be comparing Monitor XT12 and Dynamo 1600X, two Powered Subwoofer speakers from Polk Audio and MartinLogan. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Monitor XT12 and MartinLogan 1600X first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Monitor XT12 and MartinLogan 1600X compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk Monitor XT12and MartinLogan 1600X have a single woofer setup however the Polk Monitor XT12's woofer is 12-inch whereas the MartinLogan 1600X features a 15-inch woofer.
Frequency Response
Monitor XT12 has a frequency range of 24-160 Hz whereas Dynamo 1600X has a frequency range of 20-200 Hz. With a minimum frequency of 20Hz, the Dynamo 1600X can go slightly deeper then the Monitor XT12's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk Monitor XT12 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the MartinLogan 1600X have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Monitor XT12's and MartinLogan 1600X's external dimensions. Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm ( 16-7/16inch x 16-1/16inch x 19-1/16inch ) whereas MartinLogan 1600X has external dimensions of 510.0 x 456.0 x 470.0mm ( 20-1/16 x 17-15/16 x 18-1/2inch) .
Polk Monitor XT12 is 48mm narrower and 92mm shorter than MartinLogan 1600X but it is also 15mm deeper.
Below you can see the front view size comparison of Polk Monitor XT12 and MartinLogan 1600X in scale.
Comparison image of Polk Monitor XT12 and MartinLogan 1600X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2 and base area of the MartinLogan 1600X is approximately 2143.2cm2 / 332.2inch2. The Monitor XT12 requires 8% less surface area than the Dynamo 1600X which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Monitor XT12 weighs 17.73kg / 39lbs and the MartinLogan 1600X weighs 25.91kg / 57lbs. This makes the Dynamo 1600X 46% heavier than the Monitor XT12.
Here is a comparison of how Monitor XT12 and Dynamo 1600X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk Monitor XT12?
Here are the items that are included inside the box of Monitor XT12:
Black powered subwoofer6.5-feet AC power cordGrilleOwners ManualOnline registration card
What's in the Box of MartinLogan 1600X?
Here are the items that come with the Dynamo 1600X:
Powered subwooferGrille6.5-feet AC power cordUser-feets Manual
 Height |
418mm
vs
510mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1978cm2 (408x485mm)
vs
2143cm2 (456x470mm)
|
Takes less floor space |
 Price per pair* |
399USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
160k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Polk Monitor XT12 |
MartinLogan Dynamo 1600X |
| Brand |
Polk Audio |
MartinLogan |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
900 watts |
| Frequency Response |
24-160 Hz |
20-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
900-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
15" |
| Woofer Composition |
Bi-laminate paper |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
bottom |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
510.0mm (20.1") |
| Width |
408.0mm (16.1") |
456.0mm (18") |
| Depth |
485.0mm (19.1") |
470.0mm (18.5") |
| Weight |
17.73kg (39lbs) |
25.91kg (57lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
n/a |
Satin Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Yrs w/ Registration |
| Labor Warranty |
3 Years |
3 Yrs w/ Registration |