In this review, we will be comparing Monitor XT10 and R-101SW, two Powered Subwoofer speakers from Polk Audio and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Monitor XT10 and Klipsch R-101SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Monitor XT10 and Klipsch R-101SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Polk Monitor XT10and Klipsch R-101SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Monitor XT10 has a frequency range of 24-160 Hz whereas R-101SW has a frequency range of 29.5-160 Hz. With a minimum frequency of 24Hz, the Monitor XT10 can go significantly deeper on the low side and provide stronger bass compared to the R-101SW's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Polk Monitor XT10 and Klipsch R-101SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Monitor XT10's and Klipsch R-101SW's external dimensions. Polk Monitor XT10 has external dimensions of 399.0 x 302.0 x 422.0mm ( 15-11/16 x 11-7/8 x 16-5/8inch) whereas Klipsch R-101SW has external dimensions of 370.0 x 358.0 x 529.0mm ( 14-9/16inch x 14-1/16inch x 20-13/16inch ) .
Polk Monitor XT10 is 56mm narrower and 107mm less deeper than Klipsch R-101SW but it is also 29mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Monitor XT10 is approximately 1274.4cm2 / 197.5inch2 and base area of the Klipsch R-101SW is approximately 1893.8cm2 / 293.5inch2. The Monitor XT10 requires 33% less surface area than the R-101SW which gives it a small advantage on placement in tight spaces.