In this review, we will be comparing Monitor XT10 and KC62, two Powered Subwoofer speakers from Polk Audio and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Monitor XT10 and KEF KC62 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Monitor XT10 and KEF KC62 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Polk Monitor XT10 and KEF KC62 have a totally different setup: the Polk Monitor XT10 features 1 x 10-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
Monitor XT10 has a frequency range of 24-160 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the Monitor XT10's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk Monitor XT10 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KC62 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Monitor XT10's and KEF KC62's external dimensions. Polk Monitor XT10 has external dimensions of 399.0 x 302.0 x 422.0mm ( 15-11/16 x 11-7/8 x 16-5/8inch) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm ( 9-5/8inch x 10-1/8inch x 11-1/16inch ) .
Polk Monitor XT10 is clearly the larger of the two speakers. Its body is 44mm wider, 154mm taller and 141mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Monitor XT10 is approximately 1274.4cm2 / 197.5inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The Monitor XT10 requires 76% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.