In this review, we will be comparing PSW125 and KUBE 8b, two Powered Subwoofer speakers from Polk Audio and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk PSW125 and KEF KUBE 8b first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk PSW125 and KEF KUBE 8b compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk PSW125and KEF KUBE 8b have a single woofer setup however the Polk PSW125's woofer is 12-inch whereas the KEF KUBE 8b features a 8-inch woofer.
Frequency Response
PSW125 has a frequency range of 32-225 Hz whereas KUBE 8b has a frequency range of 34-140 Hz. With a minimum frequency of 32Hz, the PSW125 can go slightly deeper then the KUBE 8b's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk PSW125 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KUBE 8b have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk PSW125's and KEF KUBE 8b's external dimensions. Polk PSW125 has external dimensions of 424.0 x 413.0 x 520.0mm ( 16-11/16 x 16-1/4 x 20-7/16inch) whereas KEF KUBE 8b has external dimensions of 294.0 x 296.0 x 339.0mm ( 11-9/16 x 11-5/8 x 13-5/16inch) .
Polk PSW125 is clearly the larger of the two speakers. Its body is 117mm wider, 130mm taller and 181mm deeper than KEF KUBE 8b.
Below you can see the front view size comparison of Polk PSW125 and KEF KUBE 8b in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk PSW125 is approximately 2147.6cm2 / 332.9inch2 and base area of the KEF KUBE 8b is approximately 1003.4cm2 / 155.5inch2. The PSW125 requires 114% more surface area than the KUBE 8b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk PSW125 weighs 18.23kg / 40.1lbs and the KEF KUBE 8b weighs 11.36kg / 25lbs. This makes the PSW125 60% heavier than the KUBE 8b.
Here is a comparison of how PSW125 and KUBE 8b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk PSW125?
Here are the items that are included inside the box of PSW125:
Black powered subwooferGrille (installed)8-feet Detachable power cord4 Rubber insert feetOwners ManualOnline registration cardRubber feet installation diagram
What's in the Box of KEF KUBE 8b?
Here are the items that come with the KUBE 8b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
Low Frequency Response |
32 Hz
vs
34 Hz
|
Generates deeper bass |
High Frequency Response |
225k Hz
vs
140k Hz
|
Generates higher frequency |
Height |
294mm
vs
424mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1003cm2 (296x339mm)
vs
2147cm2 (413x520mm)
|
Takes less floor space |
General |
Polk Audio PSW125 |
KEF KUBE 8b |
Brand |
Polk Audio |
KEF |
Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
Max Amplifier Output |
150 watts |
300 watts |
Frequency Response |
32-225 Hz |
34-140 Hz |
Amplifier |
|
|
Watts RMS (Continuous) |
150-watt RMS |
300-watt RMS |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
12" |
8" |
Woofer Composition |
DB Composite |
Not given |
Tweeter Size |
- |
- |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
n/a |
40-140 Hz |
Firing Direction |
front |
front |
Physical Specs |
|
|
Height |
424.0mm (16.7") |
294.0mm (11.6") |
Width |
413.0mm (16.3") |
296.0mm (11.7") |
Depth |
520.0mm (20.5") |
339.0mm (13.3") |
Weight |
18.23kg (40.1lbs) |
11.36kg (25lbs) |
Enclosure |
Bass Reflex |
Acoustic Suspension |
Grille |
Yes |
n/a |
Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
Parts Warranty |
3 Years |
2 Years |
Labor Warranty |
3 Years |
2 Years |