In this review, we will be comparing HTS 12 and HTS 10, two Powered Subwoofer speakers by Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk HTS 12 and Polk HTS 10 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk HTS 12and Polk HTS 10 have a single woofer setup however the Polk HTS 12's woofer is 12-inch whereas the Polk HTS 10 features a 10-inch woofer.
Frequency Response
HTS 12 has a frequency range of 28-120 Hz whereas HTS 10 has a frequency range of 30-120 Hz. With a minimum frequency of 28Hz, the HTS 12 can go slightly deeper then the HTS 10's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Polk HTS 12 and Polk HTS 10 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Polk HTS 12 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk HTS 12's and Polk HTS 10's external dimensions. Polk HTS 12 has external dimensions of 478.0 x 437.0 x 510.0mm (18-13/16 x 17-3/16 x 20-1/16inch) whereas Polk HTS 10 has external dimensions of 423.0 x 385.0 x 459.0mm (16-5/8 x 15-1/8 x 18-1/16inch).
Polk HTS 12 is clearly the larger of the two speakers. Its body is 52mm wider, 55mm taller and 51mm deeper than Polk HTS 10.
Below you can see the front view size comparison of Polk HTS 12 and Polk HTS 10 in scale.
Comparison image of Polk HTS 12 and Polk HTS 10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk HTS 12 is approximately 2228.7cm2 / 345.4inch2 and base area of the Polk HTS 10 is approximately 1767.2cm2 / 273.9inch2. The HTS 12 requires 26% more surface area than the HTS 10 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk HTS 12 weighs 22.68kg / 49.9lbs and the Polk HTS 10 weighs 17.16kg / 37.8lbs. This makes the HTS 12 32% heavier than the HTS 10.
Here is a comparison of how HTS 12 and HTS 10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk HTS 12?
Here are the items that are included inside the box of HTS 12:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Owners Manual
- Online Product Registration sheet
What's in the Box of Polk HTS 10?
Here are the items that come with the HTS 10:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Owners Manual
- Online Product Registration sheet
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
30 Hz
|
Generates deeper bass |
 Height |
423mm
vs
478mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1767cm2
vs
2228cm2
|
Takes less floor space |
 Price per pair* |
449USD
vs
549USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk HTS 12 needs about 26% more floor area. Polk HTS 12 stands 51mm further into the room. Polk HTS 12 is 55mm taller.
| General |
Polk Audio HTS 12 |
Polk Audio HTS 10 |
| Brand |
Polk Audio |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
100 watts |
| Frequency Response |
28-120 Hz |
30-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
100-watt RMS |
| Watts Peak (Max) |
400-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polypropylene |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
478.0mm (18.8") |
423.0mm (16.7") |
| Width |
437.0mm (17.2") |
385.0mm (15.2") |
| Depth |
510.0mm (20.1") |
459.0mm (18.1") |
| Weight |
22.68kg (49.9lbs) |
17.16kg (37.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |
Siblings in Polk Audio's HTS range - same design thinking, different size. It comes down to your room and your budget.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (28Hz vs 30Hz). |
| Amplifier power | A | Polk HTS 12 has the bigger amplifier - 200W against 100W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Polk HTS 12 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Cabinet size | depends | Polk HTS 10 is about 30% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | Polk HTS 10 costs less - $449 against $549, about 18% less. |
A Polk HTS 12 B Polk HTS 10
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Polk HTS 12 measures better, Polk HTS 10 costs about 18% less. In a normal room, placement will make a bigger difference than the gap between these two. If placement is the constraint - a corner, behind a sofa, under a desk - Polk HTS 10 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.