In this review, we will be comparing HTS 10 and ProSub 1000, two Powered Subwoofer speakers from Polk Audio and Definitive Technology. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk HTS 10 and Definitive ProSub 1000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Polk HTS 10and Definitive ProSub 1000 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
HTS 10 has a frequency range of 30-120 Hz whereas ProSub 1000 has a frequency range of 18-150 Hz. With a minimum frequency of 18Hz, the ProSub 1000 can go significantly deeper on the low side and provide stronger bass compared to the HTS 10's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk HTS 10 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Definitive ProSub 1000 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk HTS 10's and Definitive ProSub 1000's external dimensions. Polk HTS 10 has external dimensions of 423.0 x 385.0 x 459.0mm (16-5/8 x 15-1/8 x 18-1/16inch) whereas Definitive ProSub 1000 has external dimensions of 366.0 x 307.0 x 486.0mm (14-3/8 x 12-1/16 x 19-1/8inch).
Definitive ProSub 1000 is 78mm narrower and 57mm shorter than Polk HTS 10 but it is also 27mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk HTS 10 is approximately 1767.2cm2 / 273.9inch2 and base area of the Definitive ProSub 1000 is approximately 1492.0cm2 / 231.3inch2. The HTS 10 requires 18% more surface area than the ProSub 1000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk HTS 10 weighs 17.16kg / 37.8lbs and the Definitive ProSub 1000 weighs 14.09kg / 31lbs. This makes the HTS 10 22% heavier than the ProSub 1000.
Here is a comparison of how HTS 10 and ProSub 1000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk HTS 10?
Here are the items that are included inside the box of HTS 10:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Owners Manual
- Online Product Registration sheet
What's in the Box of Definitive ProSub 1000?
Here are the items that come with the ProSub 1000:
- 10-inch Powered subwoofer
- Detachable grille (installed)
- 7-feet AC power cord
- Owners Manual
- Online Product Registration card
 Price per pair* |
449USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
18 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
150 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
366mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1492cm2
vs
1767cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk HTS 10 needs about 18% more floor area. Definitive ProSub 1000 stands 27mm further into the room. Polk HTS 10 is 57mm taller.
| General |
Polk Audio HTS 10 |
Definitive Technology ProSub 1000 |
| Brand |
Polk Audio |
Definitive Technology |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
300 watts |
| Frequency Response |
30-120 Hz |
18-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Polypropylene |
Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-150 Hz and 80 Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
366.0mm (14.4") |
| Width |
385.0mm (15.2") |
307.0mm (12.1") |
| Depth |
459.0mm (18.1") |
486.0mm (19.1") |
| Weight |
17.16kg (37.8lbs) |
14.09kg (31lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |
A ported subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Definitive ProSub 1000 goes deeper - 18Hz against 30Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | Definitive ProSub 1000 has the bigger amplifier - 300W against 100W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | depends | Polk HTS 10 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; Definitive ProSub 1000 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | Definitive ProSub 1000 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Phase control | A | Polk HTS 10 has a phase control. Without one, the only way to fix a cancellation at the crossover is to move the box. |
| Cabinet size | depends | Definitive ProSub 1000 is about 27% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Polk HTS 10 costs less - $449 against $499, about 10% less. |
A Polk HTS 10 B Definitive ProSub 1000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Definitive ProSub 1000 measures better, Polk HTS 10 costs about 10% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, Definitive ProSub 1000 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.