In this review, we will be comparing R212s and R-101SW, two Powered Subwoofer speakers from Perlisten and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten R212s and Klipsch R-101SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten R212s and Klipsch R-101SW have a totally different setup: the Perlisten R212s features x -inch drivers whereas the R-101SW features 1 x 10-inch drivers.
Frequency Response
R212s has a frequency range of 20-256 Hz whereas R-101SW has a frequency range of 29.5-160 Hz. With a minimum frequency of 20Hz, the R212s can go significantly deeper on the low side and provide stronger bass compared to the R-101SW's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Perlisten R212s and Klipsch R-101SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten R212s's and Klipsch R-101SW's external dimensions. Perlisten R212s has external dimensions of 599.9 x 410.0 x 500.1mm (23.62 x 16.14 x 19.69inch) whereas Klipsch R-101SW has external dimensions of 370.0 x 358.0 x 529.0mm (14-9/16inch x 14-1/16inch x 20-13/16inch).
Klipsch R-101SW is 52mm narrower and 229.9mm shorter than Perlisten R212s but it is also 28.9mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Perlisten R212s is approximately 2050.4cm2 / 317.8inch2 and base area of the Klipsch R-101SW is approximately 1893.8cm2 / 293.5inch2. The R212s requires 8% more surface area than the R-101SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten R212s weighs 48.20kg / 106lbs and the Klipsch R-101SW weighs 13.91kg / 30.6lbs. This makes the R212s 247% heavier than the R-101SW.
Here is a comparison of how R212s and R-101SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
20 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
256k Hz
vs
160k Hz
|
Generates higher frequency |
| Woofer Size |
10 inches
vs
inches
|
Larger woofer |
 Height |
370mm
vs
599mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1893cm2
vs
2050cm2
|
Takes less floor space |
 Price per pair* |
499USD
vs
5495USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten R212s |
Klipsch Reference R-101SW |
| Brand |
Perlisten |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
20-256 Hz |
29.5-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
150-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
10" |
| Woofer Composition |
|
Spun-Copper TCP |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
599.9mm (23.6") |
370.0mm (14.6") |
| Width |
410.0mm (16.1") |
358.0mm (14.1") |
| Depth |
500.1mm (19.7") |
529.0mm (20.8") |
| Weight |
48.20kg (106lbs) |
13.91kg (30.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |