In this review, we will be comparing R18is In Wall and RP-1200SW, two Powered Subwoofer speakers from Perlisten and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten R18is In Wall and Klipsch RP-1200SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten R18is In Wall and Klipsch RP-1200SW have a totally different setup: the Perlisten R18is In Wall features x -inch drivers whereas the RP-1200SW features 1 x 12-inch drivers.
Frequency Response
R18is In Wall has a frequency range of 20-280 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the R18is In Wall's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Perlisten R18is In Wall and Klipsch RP-1200SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten R18is In Wall's and Klipsch RP-1200SW's external dimensions. Perlisten R18is In Wall has external dimensions of () whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch).
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 432mm wider, 482mm taller and 659mm deeper than Perlisten R18is In Wall.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten R18is In Wall weighs 68.90kg / 151.6lbs and the Klipsch RP-1200SW weighs 31.18kg / 68.6lbs. This makes the R18is In Wall 121% heavier than the RP-1200SW.
Here is a comparison of how R18is In Wall and RP-1200SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
280k Hz
vs
138k Hz
|
Generates higher frequency |
 Height |
0mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
0cm2
vs
2846cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
20 Hz
|
Generates deeper bass |
 Price per pair* |
999USD
vs
5995USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten R18is In Wall |
Klipsch Reference Premiere RP-1200SW |
| Brand |
Perlisten |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Sensitivity |
150 dB |
n/a |
| Frequency Response |
20-280 Hz |
16.5-138 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
400-watt RMS |
| Watts Peak (Max) |
n/a |
800-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
12" |
| Woofer Composition |
|
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
mm (0") |
482.0mm (19") |
| Width |
mm (0") |
432.0mm (17") |
| Depth |
mm (0") |
659.0mm (25.9") |
| Weight |
68.90kg (151.6lbs) |
31.18kg (68.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
5 years |
| Labor Warranty |
|
5 years |