In this review, we will be comparing D8is In Wall or On Wall and ASW610, two Powered Subwoofer speakers from Perlisten and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten D8is In Wall or On Wall and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten D8is In Wall or On Wall and B&W ASW610 have a totally different setup: the Perlisten D8is In Wall or On Wall features x -inch drivers whereas the ASW610 features 1 x 10-inch drivers.
Frequency Response
D8is In Wall or On Wall has a frequency range of 20-290 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the D8is In Wall or On Wall can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Perlisten D8is In Wall or On Wall
High Frequency
Subwoofer Speakers
Perlisten D8is In Wall or On Wall
Cabinet Type
The Perlisten D8is In Wall or On Wall has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten D8is In Wall or On Wall's and B&W ASW610's external dimensions. Perlisten D8is In Wall or On Wall has external dimensions of () whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is clearly the larger of the two speakers. Its body is 312mm wider, 321mm taller and 394mm deeper than Perlisten D8is In Wall or On Wall.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten D8is In Wall or On Wall weighs 103.80kg / 228.4lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the D8is In Wall or On Wall 727% heavier than the ASW610.
Here is a comparison of how D8is In Wall or On Wall and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Perlisten D8is In Wall or On Wall
 Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
290k Hz
vs
140k Hz
|
Generates higher frequency |
 Height |
0mm
vs
321mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
0cm2
vs
1229cm2
|
Takes less floor space |
| Woofer Size |
10 inches
vs
inches
|
Larger woofer |
 Price per pair* |
899USD
vs
21995USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten D8is In Wall or On Wall |
Bowers & Wilkins ASW610 |
| Brand |
Perlisten |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
20-290 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
mm (0") |
321.0mm (12.6") |
| Width |
mm (0") |
312.0mm (12.3") |
| Depth |
mm (0") |
394.0mm (15.5") |
| Weight |
103.80kg (228.4lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |