In this review, we will be comparing D3is In-Wall / On-Wall and DB2D, two Powered Subwoofer speakers from Perlisten and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten D3is In-Wall / On-Wall and B&W DB2D first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten D3is In-Wall / On-Wall and B&W DB2D have a totally different setup: the Perlisten D3is In-Wall / On-Wall features x -inch drivers whereas the DB2D features 2 x 10-inch drivers.
Frequency Response
D3is In-Wall / On-Wall has a frequency range of 20-290 Hz whereas DB2D has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB2D can go significantly deeper on the low side and provide stronger bass compared to the D3is In-Wall / On-Wall's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Perlisten D3is In-Wall / On-Wall
High Frequency
Subwoofer Speakers
Perlisten D3is In-Wall / On-Wall
Cabinet Type
The Perlisten D3is In-Wall / On-Wall has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB2D have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten D3is In-Wall / On-Wall's and B&W DB2D's external dimensions. Perlisten D3is In-Wall / On-Wall has external dimensions of () whereas B&W DB2D has external dimensions of 386.0 x 431.0 x 410.0mm (15-3/16inch x 16-15/16inch x 16-1/8inch).
B&W DB2D is clearly the larger of the two speakers. Its body is 431mm wider, 386mm taller and 410mm deeper than Perlisten D3is In-Wall / On-Wall.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten D3is In-Wall / On-Wall weighs 39.70kg / 87.3lbs and the B&W DB2D weighs 36.09kg / 79.4lbs. This makes the D3is In-Wall / On-Wall 10% heavier than the DB2D.
Here is a comparison of how D3is In-Wall / On-Wall and DB2D's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Perlisten D3is In-Wall / On-Wall
 Height |
0mm
vs
386mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
0cm2
vs
1767cm2
|
Takes less floor space |
 Woofer Size |
10 inches
vs
inches
|
Larger woofer |
| Low Frequency Response |
10 Hz
vs
20 Hz
|
Generates deeper bass |
 High Frequency Response |
350k Hz
vs
290k Hz
|
Generates higher frequency |
 Price per pair* |
4499USD
vs
5995USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten D3is In-Wall / On-Wall |
Bowers & Wilkins DB2D |
| Brand |
Perlisten |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
20-290 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
2 |
| Woofer Size |
" |
10" |
| Woofer Composition |
|
Aerofoil |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
mm (0") |
386.0mm (15.2") |
| Width |
mm (0") |
431.0mm (17") |
| Depth |
mm (0") |
410.0mm (16.1") |
| Weight |
39.70kg (87.3lbs) |
36.09kg (79.4lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
n/a |
Gloss Black,Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |