In this review, we will be comparing D15s and ASW610, two Powered Subwoofer speakers from Perlisten and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten D15s and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten D15s and B&W ASW610 have a totally different setup: the Perlisten D15s features x -inch drivers whereas the ASW610 features 1 x 10-inch drivers.
Frequency Response
D15s has a frequency range of 20-320 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the D15s can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Perlisten D15s has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten D15s's and B&W ASW610's external dimensions. Perlisten D15s has external dimensions of 528.1 x 500.1 x 500.1mm (20.79 x 19.69 x 19.69inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Perlisten D15s is clearly the larger of the two speakers. Its body is 188.1mm wider, 207.1mm taller and 106.1mm deeper than B&W ASW610.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Perlisten D15s is approximately 2501.0cm2 / 387.7inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The D15s requires 103% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten D15s weighs 46.00kg / 101.2lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the D15s 267% heavier than the ASW610.
Here is a comparison of how D15s and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
320k Hz
vs
140k Hz
|
Generates higher frequency |
| Woofer Size |
10 inches
vs
inches
|
Larger woofer |
 Height |
321mm
vs
528mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
2501cm2
|
Takes less floor space |
 Price per pair* |
899USD
vs
6595USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten D15s |
Bowers & Wilkins ASW610 |
| Brand |
Perlisten |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Sensitivity |
92 dB |
n/a |
| Frequency Response |
20-320 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
528.1mm (20.8") |
321.0mm (12.6") |
| Width |
500.1mm (19.7") |
312.0mm (12.3") |
| Depth |
500.1mm (19.7") |
394.0mm (15.5") |
| Weight |
46.00kg (101.2lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |