In this review, we will be comparing SubSeries 150 and ASW610, two Powered Subwoofer speakers from PSB and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PSB SubSeries 150 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both PSB SubSeries 150and B&W ASW610 have a single woofer setup however the PSB SubSeries 150's woofer is 6.5-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
SubSeries 150 has a frequency range of 26-150 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 26Hz, the SubSeries 150 can go slightly deeper then the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both PSB SubSeries 150 and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB SubSeries 150's and B&W ASW610's external dimensions. PSB SubSeries 150 has external dimensions of 280.0 x 447.0 x 143.0mm (11 x 17-9/16 x 5-5/8inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
PSB SubSeries 150 is 41mm shorter and 251mm less deeper than B&W ASW610 but it is also 135mm wider.
Below you can see the front view size comparison of PSB SubSeries 150 and B&W ASW610 in scale.
Comparison image of PSB SubSeries 150 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB SubSeries 150 is approximately 639.2cm2 / 99.1inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The SubSeries 150 requires 48% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PSB SubSeries 150 weighs 6.05kg / 13.3lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 107% heavier than the SubSeries 150.
Here is a comparison of how SubSeries 150 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of PSB SubSeries 150?
Here are the items that are included inside the box of SubSeries 150:
- Powered subwoofer
- 6-feet AC power cord
- 2 Mounting feet
- Wall-mount bracket
- Quick Start Subwoofer Guide
- Limited Warranty sheet
- Important Safety Instructions
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Low Frequency Response |
26 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
 Height |
280mm
vs
321mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
639cm2
vs
1229cm2
|
Takes less floor space |
 Price per pair* |
499USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
| Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 92% more floor area. B&W ASW610 stands 251mm further into the room. B&W ASW610 is 41mm taller.
| General |
PSB SubSeries 150 |
Bowers & Wilkins ASW610 |
| Brand |
PSB |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
200 watts |
| Frequency Response |
26-150 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
10" |
| Woofer Composition |
Polypropylene |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
280.0mm (11") |
321.0mm (12.6") |
| Width |
447.0mm (17.6") |
312.0mm (12.3") |
| Depth |
143.0mm (5.6") |
394.0mm (15.5") |
| Weight |
6.05kg (13.3lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (26Hz vs 27Hz). |
| Amplifier power | B | B&W ASW610 has the bigger amplifier - 200W against 100W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W ASW610 moves more air: 10" against 6.5" is 2.37x the cone area, not the 1.54x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW610 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Cabinet size | depends | PSB SubSeries 150 is about 55% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W ASW610 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | PSB SubSeries 150 costs less - $499 against $899, about 44% less. |
A PSB SubSeries 150 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW610 measures better, PSB SubSeries 150 costs about 44% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW610 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $499 each, two PSB SubSeries 150 cost about $998 against $899 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.