In this review, we will be comparing Foundry F12 and KUBE 8b, two Powered Subwoofer speakers from PS Audio and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PS Audio Foundry F12 and KEF KUBE 8b first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both PS Audio Foundry F12and KEF KUBE 8b have a single woofer setup however the PS Audio Foundry F12's woofer is 12-inch whereas the KEF KUBE 8b features a 8-inch woofer.
Frequency Response
Foundry F12 has a frequency range of 20-500 Hz whereas KUBE 8b has a frequency range of 34-140 Hz. With a minimum frequency of 20Hz, the Foundry F12 can go significantly deeper on the low side and provide stronger bass compared to the KUBE 8b's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both PS Audio Foundry F12 and KEF KUBE 8b have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PS Audio Foundry F12's and KEF KUBE 8b's external dimensions. PS Audio Foundry F12 has external dimensions of 425.0 x 375.0 x 444.0mm (16-3/4 x 14-3/4 x 17-1/2inch) whereas KEF KUBE 8b has external dimensions of 294.0 x 296.0 x 339.0mm (11-9/16 x 11-5/8 x 13-5/16inch).
PS Audio Foundry F12 is clearly the larger of the two speakers. Its body is 79mm wider, 131mm taller and 105mm deeper than KEF KUBE 8b.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PS Audio Foundry F12 is approximately 1665.0cm2 / 258.1inch2 and base area of the KEF KUBE 8b is approximately 1003.4cm2 / 155.5inch2. The Foundry F12 requires 66% more surface area than the KUBE 8b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PS Audio Foundry F12 weighs 35.00kg / 77lbs and the KEF KUBE 8b weighs 11.36kg / 25lbs. This makes the Foundry F12 208% heavier than the KUBE 8b.
Here is a comparison of how Foundry F12 and KUBE 8b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
34 Hz
|
Generates deeper bass |
 High Frequency Response |
500k Hz
vs
140k Hz
|
Generates higher frequency |
 Passive Radiator |
RCA
vs
None
|
Increases the bass performance |
 Height |
294mm
vs
425mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1003cm2
vs
1665cm2
|
Takes less floor space |
 Price per pair* |
600USD
vs
2749USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PS Audio Foundry F12 |
KEF KUBE 8b |
| Brand |
PS Audio |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
300 watts |
| Frequency Response |
20-500 Hz |
34-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Composite |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
425.0mm (16.7") |
294.0mm (11.6") |
| Width |
375.0mm (14.8") |
296.0mm (11.7") |
| Depth |
444.0mm (17.5") |
339.0mm (13.3") |
| Weight |
35.00kg (77lbs) |
11.36kg (25lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |