In this review, we will be comparing Foundry F12 and KC62, two Powered Subwoofer speakers from PS Audio and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PS Audio Foundry F12 and KEF KC62 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.PS Audio Foundry F12 and KEF KC62 have a totally different setup: the PS Audio Foundry F12 features 1 x 12-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
Foundry F12 has a frequency range of 20-500 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the Foundry F12's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both PS Audio Foundry F12 and KEF KC62 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PS Audio Foundry F12's and KEF KC62's external dimensions. PS Audio Foundry F12 has external dimensions of 425.0 x 375.0 x 444.0mm (16-3/4 x 14-3/4 x 17-1/2inch) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm (9-5/8inch x 10-1/8inch x 11-1/16inch).
PS Audio Foundry F12 is clearly the larger of the two speakers. Its body is 117mm wider, 180mm taller and 163mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PS Audio Foundry F12 is approximately 1665.0cm2 / 258.1inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The Foundry F12 requires 130% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PS Audio Foundry F12 weighs 35.00kg / 77lbs and the KEF KC62 weighs 14.05kg / 30.9lbs. This makes the Foundry F12 149% heavier than the KC62.
Here is a comparison of how Foundry F12 and KC62's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
6.5 inches
|
Larger woofer |
 High Frequency Response |
500k Hz
vs
200k Hz
|
Generates higher frequency |
 Passive Radiator |
RCA
vs
None
|
Increases the bass performance |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
20 Hz
|
Generates deeper bass |
 Height |
245mm
vs
425mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2
vs
1665cm2
|
Takes less floor space |
 Price per pair* |
1500USD
vs
2749USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PS Audio Foundry F12 |
KEF KC62 |
| Brand |
PS Audio |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
1000 watts |
| Frequency Response |
20-500 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
6.5" |
| Woofer Composition |
Composite |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
side |
Physical Specs |
|
|
| Height |
425.0mm (16.7") |
245.0mm (9.6") |
| Width |
375.0mm (14.8") |
258.0mm (10.2") |
| Depth |
444.0mm (17.5") |
281.0mm (11.1") |
| Weight |
35.00kg (77lbs) |
14.05kg (30.9lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |