In this review, we will be comparing Foundry F12 and ASW610, two Powered Subwoofer speakers from PS Audio and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PS Audio Foundry F12 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both PS Audio Foundry F12and B&W ASW610 have a single woofer setup however the PS Audio Foundry F12's woofer is 12-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
Foundry F12 has a frequency range of 20-500 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the Foundry F12 can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both PS Audio Foundry F12 and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PS Audio Foundry F12's and B&W ASW610's external dimensions. PS Audio Foundry F12 has external dimensions of 425.0 x 375.0 x 444.0mm (16-3/4 x 14-3/4 x 17-1/2inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
PS Audio Foundry F12 is clearly the larger of the two speakers. Its body is 63mm wider, 104mm taller and 50mm deeper than B&W ASW610.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PS Audio Foundry F12 is approximately 1665.0cm2 / 258.1inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Foundry F12 requires 35% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PS Audio Foundry F12 weighs 35.00kg / 77lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Foundry F12 179% heavier than the ASW610.
Here is a comparison of how Foundry F12 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
500k Hz
vs
140k Hz
|
Generates higher frequency |
 Passive Radiator |
RCA
vs
None
|
Increases the bass performance |
 Height |
321mm
vs
425mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1665cm2
|
Takes less floor space |
 Price per pair* |
899USD
vs
2749USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
PS Audio Foundry F12 |
Bowers & Wilkins ASW610 |
| Brand |
PS Audio |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
200 watts |
| Frequency Response |
20-500 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Composite |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
425.0mm (16.7") |
321.0mm (12.6") |
| Width |
375.0mm (14.8") |
312.0mm (12.3") |
| Depth |
444.0mm (17.5") |
394.0mm (15.5") |
| Weight |
35.00kg (77lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |