In this review, we will be comparing Bronze W10 and ASW610, two Powered Subwoofer speakers from Monitor Audio and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Monitor Audio Bronze W10 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Monitor Audio Bronze W10and B&W ASW610 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Bronze W10 has a frequency range of 29-150 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go slightly deeper then the Bronze W10's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Monitor Audio Bronze W10 has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze W10's and B&W ASW610's external dimensions. Monitor Audio Bronze W10 has external dimensions of 361.0 x 321.0 x 405.0mm (14-3/16 x 12-5/8 x 15-15/16inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Monitor Audio Bronze W10 is clearly the larger of the two speakers. Its body is 9mm wider, 40mm taller and 11mm deeper than B&W ASW610.
Below you can see the front view size comparison of Monitor Audio Bronze W10 and B&W ASW610 in scale.
Comparison image of Monitor Audio Bronze W10 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze W10 is approximately 1300.1cm2 / 201.5inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Bronze W10 requires 6% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Monitor Audio Bronze W10 weighs 13.44kg / 29.6lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Bronze W10 7% heavier than the ASW610.
Here is a comparison of how Bronze W10 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Monitor Audio Bronze W10?
Here are the items that are included inside the box of Bronze W10:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 10-feet Mono-minijack cable
- 4 Rubber feet
- Quick Start Guide
- Important Safety Instructions
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 High Frequency Response |
150k Hz
vs
140k Hz
|
Generates higher frequency |
 Low Frequency Response |
27 Hz
vs
29 Hz
|
Generates deeper bass |
 Height |
321mm
vs
361mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1300cm2
|
Takes less floor space |
 Price per pair* |
899USD
vs
975USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze W10 |
Bowers & Wilkins ASW610 |
| Brand |
Monitor Audio |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
220 watts |
200 watts |
| Frequency Response |
29-150 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
220-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
C-CAM |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
361.0mm (14.2") |
321.0mm (12.6") |
| Width |
321.0mm (12.6") |
312.0mm (12.3") |
| Depth |
405.0mm (15.9") |
394.0mm (15.5") |
| Weight |
13.44kg (29.6lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Passive Radiator |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |