In this review, we will be comparing LX-10SUB MKII and SB-1000 Pro, two Powered Subwoofer speakers from Mission and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Mission LX-10SUB MKII and SVS SB-1000 Pro first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Mission LX-10SUB MKII and SVS SB-1000 Pro compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Mission LX-10SUB MKIIand SVS SB-1000 Pro have a single woofer setup however the Mission LX-10SUB MKII's woofer is 10-inch whereas the SVS SB-1000 Pro features a 12-inch woofer.
Frequency Response
LX-10SUB MKII has a frequency range of 40-200 Hz whereas SB-1000 Pro has a frequency range of 20-270 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the LX-10SUB MKII's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Mission LX-10SUB MKII has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-1000 Pro have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Mission LX-10SUB MKII's and SVS SB-1000 Pro's external dimensions. Mission LX-10SUB MKII has external dimensions of 447.0 x 312.0 x 407.0mm ( 17-5/8 x 12-5/16 x 16inch) whereas SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm ( 13-1/2inch x 13inch x 15-13/16inch ) .
SVS SB-1000 Pro is 104mm shorter and 5mm less deeper than Mission LX-10SUB MKII but it is also 19mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Mission LX-10SUB MKII is approximately 1269.8cm2 / 196.8inch2 and base area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2. The LX-10SUB MKII requires 5% less surface area than the SB-1000 Pro which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Mission LX-10SUB MKII weighs 16.00kg / 35.2lbs and the SVS SB-1000 Pro weighs 11.82kg / 26lbs. This makes the LX-10SUB MKII 35% heavier than the SB-1000 Pro.
Here is a comparison of how LX-10SUB MKII and SB-1000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Base Surface Area |
1269cm2
vs
1330cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
200k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
343mm
vs
447mm
|
Easier to fit in smaller spaces |
| General |
Mission LX-10SUB MKII |
SVS SB-1000 Pro |
| Brand |
Mission |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
325 watts |
| Frequency Response |
40-200 Hz |
20-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
325-watt RMS |
| Watts Peak (Max) |
350-watt RMS |
820-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Paper |
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
30 - 150Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
447.0mm (17.6") |
343.0mm (13.5") |
| Width |
312.0mm (12.3") |
331.0mm (13") |
| Depth |
407.0mm (16") |
402.0mm (15.8") |
| Weight |
16.00kg (35.2lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
n/a |
Black,White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |