In this review, we will be comparing Dynamo 1600X and A120P, two Powered Subwoofer speakers from MartinLogan and JBL. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of MartinLogan 1600X and JBL Stage A120P first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the MartinLogan 1600X and JBL Stage A120P compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both MartinLogan 1600Xand JBL Stage A120P have a single woofer setup however the MartinLogan 1600X's woofer is 15-inch whereas the JBL Stage A120P features a 12-inch woofer.
Frequency Response
Dynamo 1600X has a frequency range of 20-200 Hz whereas A120P has a frequency range of 32-150 Hz. With a minimum frequency of 20Hz, the Dynamo 1600X can go significantly deeper on the low side and provide stronger bass compared to the A120P's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The MartinLogan 1600X has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the JBL Stage A120P have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 1600X's and JBL Stage A120P's external dimensions. MartinLogan 1600X has external dimensions of 510.0 x 456.0 x 470.0mm ( 20-1/16 x 17-15/16 x 18-1/2inch) whereas JBL Stage A120P has external dimensions of 415.0 x 393.0 x 475.0mm ( 16-5/16 x 15-7/16 x 18-11/16inch) .
JBL Stage A120P is 63mm narrower and 95mm shorter than MartinLogan 1600X but it is also 5mm deeper.
Below you can see the front view size comparison of MartinLogan 1600X and JBL Stage A120P in scale.
Comparison image of MartinLogan 1600X and JBL Stage A120P Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 1600X is approximately 2143.2cm2 / 332.2inch2 and base area of the JBL Stage A120P is approximately 1866.8cm2 / 289.4inch2. The Dynamo 1600X requires 15% more surface area than the A120P which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The MartinLogan 1600X weighs 25.91kg / 57lbs and the JBL Stage A120P weighs 18.68kg / 41.1lbs. This makes the Dynamo 1600X 39% heavier than the A120P.
Here is a comparison of how Dynamo 1600X and A120P's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of MartinLogan 1600X?
Here are the items that are included inside the box of Dynamo 1600X:
Powered subwooferGrille6.5-feet AC power cordUser-feets Manual
What's in the Box of JBL Stage A120P?
Here are the items that come with the A120P:
Powered subwooferGrille6-feet AC power cord4 Spike feetOwners ManualWarranty CardImportant Safety Instructions
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
150k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
415mm
vs
510mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1866cm2
vs
2143cm2
|
Takes less floor space |
 Price per pair* |
300USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Dynamo 1600X |
JBL Stage A120P |
| Brand |
MartinLogan |
JBL |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
900 watts |
250 watts |
| Frequency Response |
20-200 Hz |
32-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
900-watt RMS |
250-watt RMS |
| Watts Peak (Max) |
n/a |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
12" |
| Woofer Composition |
Polypropylene |
Polycellulose |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
510.0mm (20.1") |
415.0mm (16.3") |
| Width |
456.0mm (18") |
393.0mm (15.5") |
| Depth |
470.0mm (18.5") |
475.0mm (18.7") |
| Weight |
25.91kg (57lbs) |
18.68kg (41.1lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Available Colors |
Satin Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Yrs w/ Registration |
1 Year |
| Labor Warranty |
3 Yrs w/ Registration |
1 Year |