In this review, we will be comparing Dynamo 1600X and ASW608, two Powered Subwoofer speakers from MartinLogan and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of MartinLogan 1600X and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both MartinLogan 1600Xand B&W ASW608 have a single woofer setup however the MartinLogan 1600X's woofer is 15-inch whereas the B&W ASW608 features a 8-inch woofer.
Frequency Response
Dynamo 1600X has a frequency range of 20-200 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 20Hz, the Dynamo 1600X can go significantly deeper on the low side and provide stronger bass compared to the ASW608's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both MartinLogan 1600X and B&W ASW608 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 1600X's and B&W ASW608's external dimensions. MartinLogan 1600X has external dimensions of 510.0 x 456.0 x 470.0mm (20-1/16 x 17-15/16 x 18-1/2inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
MartinLogan 1600X is clearly the larger of the two speakers. Its body is 195mm wider, 238mm taller and 120mm deeper than B&W ASW608.
Below you can see the front view size comparison of MartinLogan 1600X and B&W ASW608 in scale.
Comparison image of MartinLogan 1600X and B&W ASW608 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 1600X is approximately 2143.2cm2 / 332.2inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The Dynamo 1600X requires 135% more surface area than the ASW608 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The MartinLogan 1600X weighs 25.91kg / 57lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the Dynamo 1600X 192% heavier than the ASW608.
Here is a comparison of how Dynamo 1600X and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of MartinLogan 1600X?
Here are the items that are included inside the box of Dynamo 1600X:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- User-feets Manual
What's in the Box of B&W ASW608?
Here are the items that come with the ASW608:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Woofer Size |
15 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
272mm
vs
510mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
913cm2
vs
2143cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
MartinLogan 1600X needs about 135% more floor area. MartinLogan 1600X stands 120mm further into the room. MartinLogan 1600X is 238mm taller.
| General |
MartinLogan Dynamo 1600X |
Bowers & Wilkins ASW608 |
| Brand |
MartinLogan |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
900 watts |
200 watts |
| Frequency Response |
20-200 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
900-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
8" |
| Woofer Composition |
Polypropylene |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
510.0mm (20.1") |
272.0mm (10.7") |
| Width |
456.0mm (18") |
261.0mm (10.3") |
| Depth |
470.0mm (18.5") |
350.0mm (13.8") |
| Weight |
25.91kg (57lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Available Colors |
Satin Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Yrs w/ Registration |
2 Years |
| Labor Warranty |
3 Yrs w/ Registration |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | A | MartinLogan 1600X goes deeper - 20Hz against 32Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | MartinLogan 1600X has the bigger amplifier - 900W against 200W RMS, about 6.5dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | MartinLogan 1600X moves more air: 15" against 8" is 3.52x the cone area, not the 1.88x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW608 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only MartinLogan 1600X offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Driver placement | depends | MartinLogan 1600X fires down and B&W ASW608 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | B&W ASW608 is about 77% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | MartinLogan 1600X carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | B&W ASW608 costs less - $599 against $2,000, about 70% less. |
A MartinLogan 1600X B B&W ASW608
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: MartinLogan 1600X measures better, B&W ASW608 costs about 70% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW608 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $599 each, two B&W ASW608 cost about $1,198 against $2,000 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.