In this review, we will be comparing Depth 215 and RP-1200SW, two Powered Subwoofer speakers from MartinLogan and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of MartinLogan Depth 215 and Klipsch RP-1200SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the MartinLogan Depth 215 and Klipsch RP-1200SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.MartinLogan Depth 215 and Klipsch RP-1200SW have a totally different setup: the MartinLogan Depth 215 features 2 x 15-inch drivers whereas the RP-1200SW features 1 x 12-inch drivers.
Frequency Response
Depth 215 has a frequency range of 18-120 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the Depth 215's min frequency of 18Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The MartinLogan Depth 215 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch RP-1200SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan Depth 215's and Klipsch RP-1200SW's external dimensions. MartinLogan Depth 215 has external dimensions of 572.0 x 580.0 x 595.0mm ( 22-1/2 x 22-13/16 x 23-7/16inch) whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) .
Klipsch RP-1200SW is 148mm narrower and 90mm shorter than MartinLogan Depth 215 but it is also 64mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan Depth 215 is approximately 3451.0cm2 / 534.9inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The Depth 215 requires 21% more surface area than the RP-1200SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The MartinLogan Depth 215 weighs 78.50kg / 172.7lbs and the Klipsch RP-1200SW weighs 31.18kg / 68.6lbs. This makes the Depth 215 152% heavier than the RP-1200SW.
Here is a comparison of how Depth 215 and RP-1200SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
17 Hz
vs
18 Hz
|
Generates deeper bass |
 High Frequency Response |
138k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
482mm
vs
572mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2846cm2
vs
3451cm2
|
Takes less floor space |
 Price per pair* |
999USD
vs
7000USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Depth 215 |
Klipsch Reference Premiere RP-1200SW |
| Brand |
MartinLogan |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
2200 watts |
400 watts |
| Frequency Response |
18-120 Hz |
16.5-138 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
2200-watt RMS |
400-watt RMS |
| Watts Peak (Max) |
4400-watt RMS |
800-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
15" |
12" |
| Woofer Composition |
Aluminium |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
35–120Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
572.0mm (22.5") |
482.0mm (19") |
| Width |
580.0mm (22.8") |
432.0mm (17") |
| Depth |
595.0mm (23.4") |
659.0mm (25.9") |
| Weight |
78.50kg (172.7lbs) |
31.18kg (68.6lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
5 years |
| Labor Warranty |
|
5 years |