In this review, we will be comparing BalancedForce 210 and Monitor XT12, two Powered Subwoofer speakers from MartinLogan and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of MartinLogan BalancedForce 210 and Polk Monitor XT12 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.MartinLogan BalancedForce 210 and Polk Monitor XT12 have a totally different setup: the MartinLogan BalancedForce 210 features 2 x 10-inch drivers whereas the Monitor XT12 features 1 x 12-inch drivers.
Frequency Response
BalancedForce 210 has a frequency range of 20-120 Hz whereas Monitor XT12 has a frequency range of 24-160 Hz. With a minimum frequency of 20Hz, the BalancedForce 210 can go slightly deeper then the Monitor XT12's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
MartinLogan BalancedForce 210
High Frequency
Subwoofer Speakers
MartinLogan BalancedForce 210
Cabinet Type
The MartinLogan BalancedForce 210 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Polk Monitor XT12 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan BalancedForce 210's and Polk Monitor XT12's external dimensions. MartinLogan BalancedForce 210 has external dimensions of 485.0 x 486.0 x 543.0mm (19-1/16inch x 19-1/8inch x 21-3/8inch) whereas Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm (16-7/16inch x 16-1/16inch x 19-1/16inch).
MartinLogan BalancedForce 210 is clearly the larger of the two speakers. Its body is 78mm wider, 67mm taller and 58mm deeper than Polk Monitor XT12.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan BalancedForce 210 is approximately 2639.0cm2 / 409.0inch2 and base area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2. The BalancedForce 210 requires 33% more surface area than the Monitor XT12 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The MartinLogan BalancedForce 210 weighs 43.64kg / 96lbs and the Polk Monitor XT12 weighs 17.73kg / 39lbs. This makes the BalancedForce 210 146% heavier than the Monitor XT12.
Here is a comparison of how BalancedForce 210 and Monitor XT12's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
MartinLogan BalancedForce 210
What's in the Box of MartinLogan BalancedForce 210?
Here are the items that are included inside the box of BalancedForce 210:
- Powered subwoofer
- Top-glass cover
- 2 Grilles
- 8-feet AC power cord
- 4 Spike feet
- 4 Collars
- USB thumbdrive
- User-feets Manual
- Online Registration Card
What's in the Box of Polk Monitor XT12?
Here are the items that come with the Monitor XT12:
- Black powered subwoofer
- 6.5-feet AC power cord
- Grille
- Owners Manual
- Online registration card
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
20 Hz
vs
24 Hz
|
Generates deeper bass |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
160 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
418mm
vs
485mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1978cm2
vs
2639cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
3499USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
MartinLogan BalancedForce 210 needs about 33% more floor area. MartinLogan BalancedForce 210 stands 58mm further into the room. MartinLogan BalancedForce 210 is 67mm taller.
| General |
MartinLogan BalancedForce 210 |
Polk Monitor XT12 |
| Brand |
MartinLogan |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
850 watts |
50 watts |
| Frequency Response |
20-120 Hz |
24-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
850-watt RMS |
50-watt RMS |
| Watts Peak (Max) |
1700-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Aluminum |
Bi-laminate paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
485.0mm (19.1") |
418.0mm (16.5") |
| Width |
486.0mm (19.1") |
408.0mm (16.1") |
| Depth |
543.0mm (21.4") |
485.0mm (19.1") |
| Weight |
43.64kg (96lbs) |
17.73kg (39lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
Gloss Black, Black Ash |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years w/ Registration |
3 Years |
| Labor Warranty |
3 Years w/ Registration |
3 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | MartinLogan BalancedForce 210 goes deeper - 20Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | MartinLogan BalancedForce 210 has the bigger amplifier - 850W against 50W RMS, about 12.3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | MartinLogan BalancedForce 210 moves more air: 2 x 10" against 12" is 1.39x the cone area, not the 1.18x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | MartinLogan BalancedForce 210 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Polk Monitor XT12 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Driver placement | depends | MartinLogan BalancedForce 210 fires side and Polk Monitor XT12 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | Polk Monitor XT12 is about 35% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | Polk Monitor XT12 costs less - $399 against $3,499, about 89% less. |
A MartinLogan BalancedForce 210 B Polk Monitor XT12
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: MartinLogan BalancedForce 210 measures better, Polk Monitor XT12 costs about 89% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Polk Monitor XT12 will hit harder for the money; if it is mainly for music in a normal-sized room, MartinLogan BalancedForce 210 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $399 each, two Polk Monitor XT12 cost about $798 against $3,499 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.