In this review, we will be comparing CR8SBT and ASW610, two Powered Subwoofer speakers from Mackie and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Mackie CR8SBT and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Mackie CR8SBTand B&W ASW610 have a single woofer setup however the Mackie CR8SBT's woofer is 8-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
CR8SBT has a frequency range of 37-400 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go significantly deeper on the low side and provide stronger bass compared to the CR8SBT's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Mackie CR8SBT's and B&W ASW610's external dimensions. Mackie CR8SBT has external dimensions of 368.3 x 322.3 x 457.2mm () whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Mackie CR8SBT is clearly the larger of the two speakers. Its body is 10.3mm wider, 47.3mm taller and 63.2mm deeper than B&W ASW610.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Mackie CR8SBT needs about 20% more floor or shelf area. Mackie CR8SBT is 63mm deeper, so it stands that much further out from the wall. Mackie CR8SBT is 47mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Mackie CR8SBT is approximately 1473.6cm2 / 228.4inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The CR8SBT requires 20% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Mackie CR8SBT weighs 11.52kg / 25.3lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 9% heavier than the CR8SBT.
Here is a comparison of how CR8SBT and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
400 Hz
vs
140 Hz
|
Generates higher frequency |
 Price per pair* |
200USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
37 Hz
|
Generates deeper bass |
 Height |
321mm
vs
368mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1473cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Mackie CR8SBT needs about 20% more floor area. Mackie CR8SBT stands 63mm further into the room. Mackie CR8SBT is 47mm taller.
| General |
Mackie CR8SBT |
Bowers & Wilkins ASW610 |
| Brand |
Mackie |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
37-400 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
368.3mm (14.5") |
321.0mm (12.6") |
| Width |
322.3mm (12.7") |
312.0mm (12.3") |
| Depth |
457.2mm (18") |
394.0mm (15.5") |
| Weight |
11.52kg (25.3lbs) |
12.55kg (27.6lbs) |
| Enclosure |
|
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W ASW610 goes deeper - 27Hz against 37Hz. A real difference, though most music has little content below 37Hz. |
| Amplifier power | B | B&W ASW610 has the bigger amplifier - 200W against 100W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W ASW610 moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Mackie CR8SBT is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W ASW610 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | B&W ASW610 is about 27% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W ASW610 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Mackie CR8SBT costs less - $200 against $899, about 78% less. |
A Mackie CR8SBT B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW610 measures better, Mackie CR8SBT costs about 78% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Mackie CR8SBT will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW610 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $200 each, two Mackie CR8SBT cost about $400 against $899 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.