In this review, we will be comparing R-121SW and Sub 3, two Powered Subwoofer speakers from Klipsch and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-121SW and Dynaudio Sub 3 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-121SWand Dynaudio Sub 3 have a single woofer setup however the Klipsch R-121SW's woofer is 12-inch whereas the Dynaudio Sub 3 features a 9.5-inch woofer.
Frequency Response
R-121SW has a frequency range of 28-120 Hz whereas Sub 3 has a frequency range of 22-175 Hz. With a minimum frequency of 22Hz, the Sub 3 can go significantly deeper on the low side and provide stronger bass compared to the R-121SW's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-121SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Dynaudio Sub 3 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Klipsch R-121SW Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-121SW's and Dynaudio Sub 3's external dimensions. Klipsch R-121SW has external dimensions of 423.0 x 407.0 x 532.0mm (16-5/8inch x 16inch x 20-15/16inch) whereas Dynaudio Sub 3 has external dimensions of 277.0 x 269.0 x 366.0mm (10-7/8 x 10-9/16 x 14-3/8inch).
Klipsch R-121SW is clearly the larger of the two speakers. Its body is 138mm wider, 146mm taller and 166mm deeper than Dynaudio Sub 3.
Below you can see the front view size comparison of Klipsch R-121SW and Dynaudio Sub 3 in scale.
Comparison image of Klipsch R-121SW and Dynaudio Sub 3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-121SW is approximately 2165.2cm2 / 335.6inch2 and base area of the Dynaudio Sub 3 is approximately 984.5cm2 / 152.6inch2. The R-121SW requires 120% more surface area than the Sub 3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-121SW weighs 16.00kg / 35.2lbs and the Dynaudio Sub 3 weighs 10.50kg / 23.1lbs. This makes the R-121SW 52% heavier than the Sub 3.
Here is a comparison of how R-121SW and Sub 3's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-121SW?
Here are the items that are included inside the box of R-121SW:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of Dynaudio Sub 3?
Here are the items that come with the Sub 3:
- Powered subwoofer
- Grille
- 6-feet AC power cord
- Owners Manual
- Quick Start Guide
- Warranty Extension Card
 Woofer Size |
12 inches
vs
9.5 inches
|
Larger woofer |
| Low Frequency Response |
22 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
175k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
277mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
984cm2
vs
2165cm2
|
Takes less floor space |
| General |
Klipsch Reference R-121SW |
Dynaudio Sub 3 |
| Brand |
Klipsch |
Dynaudio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
300 watts |
| Frequency Response |
28-120 Hz |
22-175 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
9.5" |
| Woofer Composition |
Spun-Copper TCP |
Magnesium Silicate Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-150Hz and 60Hz/80Hz/FlatHz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
277.0mm (10.9") |
| Width |
407.0mm (16") |
269.0mm (10.6") |
| Depth |
532.0mm (20.9") |
366.0mm (14.4") |
| Weight |
16.00kg (35.2lbs) |
10.50kg (23.1lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |