In this review, we will be comparing R-121SW and SuperCube 2000, two Powered Subwoofer speakers from Klipsch and Definitive Technology. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-121SW and DT SuperCube 2000 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-121SW and DT SuperCube 2000 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-121SWand DT SuperCube 2000 have a single woofer setup however the Klipsch R-121SW's woofer is 12-inch whereas the DT SuperCube 2000 features a 7.5-inch woofer.
Frequency Response
R-121SW has a frequency range of 28-120 Hz whereas SuperCube 2000 has a frequency range of 20-200 Hz. With a minimum frequency of 20Hz, the SuperCube 2000 can go significantly deeper on the low side and provide stronger bass compared to the R-121SW's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-121SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the DT SuperCube 2000 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Klipsch R-121SW Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-121SW's and DT SuperCube 2000's external dimensions. Klipsch R-121SW has external dimensions of 423.0 x 407.0 x 532.0mm ( 16-5/8inch x 16inch x 20-15/16inch ) whereas DT SuperCube 2000 has external dimensions of 275.0 x 261.0 x 321.0mm ( 10-13/16 x 10-1/4 x 12-5/8inch) .
Klipsch R-121SW is clearly the larger of the two speakers. Its body is 146mm wider, 148mm taller and 211mm deeper than DT SuperCube 2000.
Below you can see the front view size comparison of Klipsch R-121SW and DT SuperCube 2000 in scale.
Comparison image of Klipsch R-121SW and DT SuperCube 2000 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-121SW is approximately 2165.2cm2 / 335.6inch2 and base area of the DT SuperCube 2000 is approximately 837.8cm2 / 129.9inch2. The R-121SW requires 158% more surface area than the SuperCube 2000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-121SW weighs 16.00kg / 35.2lbs and the DT SuperCube 2000 weighs 11.36kg / 25lbs. This makes the R-121SW 41% heavier than the SuperCube 2000.
Here is a comparison of how R-121SW and SuperCube 2000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-121SW?
Here are the items that are included inside the box of R-121SW:
Powered subwooferGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of DT SuperCube 2000?
Here are the items that come with the SuperCube 2000:
7.5-inch Powered subwoofer7-feet AC power cord4 Threaded rubber-feet4 Spike feet (hex-nut attached)Owners ManualOnline Product Registration card
 Woofer Size |
12 inches
vs
7.5 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
275mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
837cm2
vs
2165cm2
|
Takes less floor space |
| General |
Klipsch Reference R-121SW |
Definitive Technology SuperCube 2000 |
| Brand |
Klipsch |
Definitive Technology |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
650 watts |
| Frequency Response |
28-120 Hz |
20-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
650-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
7.5" |
| Woofer Composition |
Spun-Copper TCP |
Not given |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
275.0mm (10.8") |
| Width |
407.0mm (16") |
261.0mm (10.3") |
| Depth |
532.0mm (20.9") |
321.0mm (12.6") |
| Weight |
16.00kg (35.2lbs) |
11.36kg (25lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |