In this review, we will be comparing R-121SW and DB3D, two Powered Subwoofer speakers from Klipsch and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-121SW and B&W DB3D first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-121SW and B&W DB3D have a totally different setup: the Klipsch R-121SW features 1 x 12-inch drivers whereas the DB3D features 2 x 8-inch drivers.
Frequency Response
R-121SW has a frequency range of 28-120 Hz whereas DB3D has a frequency range of 10-350Hz. With a minimum frequency of 10Hz, the DB3D can go significantly deeper on the low side and provide stronger bass compared to the R-121SW's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-121SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB3D have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Klipsch R-121SW Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-121SW's and B&W DB3D's external dimensions. Klipsch R-121SW has external dimensions of 423.0 x 407.0 x 532.0mm (16-5/8inch x 16inch x 20-15/16inch) whereas B&W DB3D has external dimensions of 368.3 x 341.3 x 347.7mm ().
Klipsch R-121SW is clearly the larger of the two speakers. Its body is 65.7mm wider, 54.7mm taller and 184.3mm deeper than B&W DB3D.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-121SW is approximately 2165.2cm2 / 335.6inch2 and base area of the B&W DB3D is approximately 1186.7cm2 / 183.9inch2. The R-121SW requires 82% more surface area than the DB3D which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-121SW weighs 16.00kg / 35.2lbs and the B&W DB3D weighs 25.05kg / 55.1lbs. This makes the DB3D 57% heavier than the R-121SW.
Here is a comparison of how R-121SW and DB3D's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-121SW?
Here are the items that are included inside the box of R-121SW:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of B&W DB3D?
Here are the items that come with the DB3D:
- Powered subwoofer
- 2 Grilles
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
 Price per pair* |
599USD
vs
3499USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
10 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
120 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
368mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1186cm2
vs
2165cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch R-121SW needs about 82% more floor area. Klipsch R-121SW stands 184mm further into the room. Klipsch R-121SW is 55mm taller.
| General |
Klipsch Reference R-121SW |
Bowers & Wilkins DB3D |
| Brand |
Klipsch |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
1000 watts |
| Frequency Response |
28-120 Hz |
10-350Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Spun-Copper TCP |
|
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
423.0mm (16.7") |
368.3mm (14.5") |
| Width |
407.0mm (16") |
341.3mm (13.4") |
| Depth |
532.0mm (20.9") |
347.7mm (13.7") |
| Weight |
16.00kg (35.2lbs) |
25.05kg (55.1lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB3D goes deeper - 10Hz against 28Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB3D has the bigger amplifier - 1000W against 200W RMS, about 7dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (12" against 2 x 8"). |
| Enclosure | depends | Klipsch R-121SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W DB3D is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | B&W DB3D is about 52% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Klipsch R-121SW costs less - $599 against $3,499, about 83% less. |
A Klipsch R-121SW B B&W DB3D
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W DB3D measures better, Klipsch R-121SW costs about 83% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch R-121SW will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB3D is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $599 each, two Klipsch R-121SW cost about $1,198 against $3,499 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.