In this review, we will be comparing R-10SWi and KUBE 8b, two Powered Subwoofer speakers from Klipsch and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-10SWi and KEF KUBE 8b first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-10SWi and KEF KUBE 8b compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-10SWiand KEF KUBE 8b have a single woofer setup however the Klipsch R-10SWi's woofer is 10-inch whereas the KEF KUBE 8b features a 8-inch woofer.
Frequency Response
R-10SWi has a frequency range of 32-120 Hz whereas KUBE 8b has a frequency range of 34-140 Hz. With a minimum frequency of 32Hz, the R-10SWi can go slightly deeper then the KUBE 8b's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-10SWi has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KUBE 8b have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Klipsch R-10SWi Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-10SWi's and KEF KUBE 8b's external dimensions. Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm ( 14-9/16 x 12-1/2 x 18-3/16inch) whereas KEF KUBE 8b has external dimensions of 294.0 x 296.0 x 339.0mm ( 11-9/16 x 11-5/8 x 13-5/16inch) .
Klipsch R-10SWi is clearly the larger of the two speakers. Its body is 22mm wider, 76mm taller and 123mm deeper than KEF KUBE 8b.
Below you can see the front view size comparison of Klipsch R-10SWi and KEF KUBE 8b in scale.
Comparison image of Klipsch R-10SWi and KEF KUBE 8b Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2 and base area of the KEF KUBE 8b is approximately 1003.4cm2 / 155.5inch2. The R-10SWi requires 46% more surface area than the KUBE 8b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-10SWi weighs 11.59kg / 25.5lbs and the KEF KUBE 8b weighs 11.36kg / 25lbs. This makes the R-10SWi 2% heavier than the KUBE 8b.
Here is a comparison of how R-10SWi and KUBE 8b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-10SWi?
Here are the items that are included inside the box of R-10SWi:
Powered subWireless transmitter (attached 12
What's in the Box of KEF KUBE 8b?
Here are the items that come with the KUBE 8b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
34 Hz
|
Generates deeper bass |
 Price per pair* |
274USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
 High Frequency Response |
140k Hz
vs
120k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
294mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1003cm2
vs
1469cm2
|
Takes less floor space |
| General |
Klipsch Reference R-10SWi |
KEF KUBE 8b |
| Brand |
Klipsch |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
300 watts |
| Frequency Response |
32-120 Hz |
34-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Copper IMG |
Not given |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
294.0mm (11.6") |
| Width |
318.0mm (12.5") |
296.0mm (11.7") |
| Depth |
462.0mm (18.2") |
339.0mm (13.3") |
| Weight |
11.59kg (25.5lbs) |
11.36kg (25lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |