In this review, we will be comparing R-101SW and KF92, two Powered Subwoofer speakers from Klipsch and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-101SW and KEF KF92 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-101SW and KEF KF92 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-101SW and KEF KF92 have a totally different setup: the Klipsch R-101SW features 1 x 10-inch drivers whereas the KF92 features 2 x 9-inch drivers.
Frequency Response
R-101SW has a frequency range of 29.5-160 Hz whereas KF92 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KF92 can go significantly deeper on the low side and provide stronger bass compared to the R-101SW's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-101SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KF92 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-101SW's and KEF KF92's external dimensions. Klipsch R-101SW has external dimensions of 370.0 x 358.0 x 529.0mm ( 14-9/16inch x 14-1/16inch x 20-13/16inch ) whereas KEF KF92 has external dimensions of 353.0 x 331.0 x 362.0mm ( 13-7/8 x 13 x 14-1/4inch) .
Klipsch R-101SW is clearly the larger of the two speakers. Its body is 27mm wider, 17mm taller and 167mm deeper than KEF KF92.
Below you can see the front view size comparison of Klipsch R-101SW and KEF KF92 in scale.
Comparison image of Klipsch R-101SW and KEF KF92 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-101SW is approximately 1893.8cm2 / 293.5inch2 and base area of the KEF KF92 is approximately 1198.2cm2 / 185.7inch2. The R-101SW requires 58% more surface area than the KF92 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-101SW weighs 13.91kg / 30.6lbs and the KEF KF92 weighs 20.05kg / 44.1lbs. This makes the KF92 44% heavier than the R-101SW.
Here is a comparison of how R-101SW and KF92's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-101SW?
Here are the items that are included inside the box of R-101SW:
Powered subwooferGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of KEF KF92?
Here are the items that come with the KF92:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
 Woofer Size |
10 inches
vs
9 inches
|
Larger woofer |
 Price per pair* |
499USD
vs
2000USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
160k Hz
|
Generates higher frequency |
 Height |
353mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1198cm2 (331x362mm)
vs
1893cm2 (358x529mm)
|
Takes less floor space |
| General |
Klipsch Reference R-101SW |
KEF KF92 |
| Brand |
Klipsch |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
1000 watts |
| Frequency Response |
29.5-160 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
10" |
9" |
| Woofer Composition |
Spun-Copper TCP |
Hybrid aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
353.0mm (13.9") |
| Width |
358.0mm (14.1") |
331.0mm (13") |
| Depth |
529.0mm (20.8") |
362.0mm (14.3") |
| Weight |
13.91kg (30.6lbs) |
20.05kg (44.1lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |