In this review, we will be comparing RP-1600SW and R-101SW, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1600SW and Klipsch R-101SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1600SW and Klipsch R-101SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1600SWand Klipsch R-101SW have a single woofer setup however the Klipsch RP-1600SW's woofer is 16-inch whereas the Klipsch R-101SW features a 10-inch woofer.
Frequency Response
RP-1600SW has a frequency range of 14.5-175 Hz whereas R-101SW has a frequency range of 29.5-160 Hz. With a minimum frequency of 15Hz, the RP-1600SW can go significantly deeper on the low side and provide stronger bass compared to the R-101SW's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1600SW and Klipsch R-101SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1600SW's and Klipsch R-101SW's external dimensions. Klipsch RP-1600SW has external dimensions of 596.0 x 597.0 x 696.0mm ( 23-7/16inch x 23-1/2inch x 27-3/8inch ) whereas Klipsch R-101SW has external dimensions of 370.0 x 358.0 x 529.0mm ( 14-9/16inch x 14-1/16inch x 20-13/16inch ) .
Klipsch RP-1600SW is clearly the larger of the two speakers. Its body is 239mm wider, 226mm taller and 167mm deeper than Klipsch R-101SW.
Below you can see the front view size comparison of Klipsch RP-1600SW and Klipsch R-101SW in scale.
Comparison image of Klipsch RP-1600SW and Klipsch R-101SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1600SW is approximately 4155.1cm2 / 644.0inch2 and base area of the Klipsch R-101SW is approximately 1893.8cm2 / 293.5inch2. The RP-1600SW requires 119% more surface area than the R-101SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1600SW weighs 50.00kg / 110lbs and the Klipsch R-101SW weighs 13.91kg / 30.6lbs. This makes the RP-1600SW 259% heavier than the R-101SW.
Here is a comparison of how RP-1600SW and R-101SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
16 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
15 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
175k Hz
vs
160k Hz
|
Generates higher frequency |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
370mm
vs
596mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1893cm2
vs
4155cm2
|
Takes less floor space |
 Price per pair* |
499USD
vs
1799USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-1600SW |
Klipsch Reference R-101SW |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
800 watts |
150 watts |
| Frequency Response |
14.5-175 Hz |
29.5-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
800-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
1600-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
16" |
10" |
| Woofer Composition |
Cerametallic |
Spun-Copper TCP |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
596.0mm (23.5") |
370.0mm (14.6") |
| Width |
597.0mm (23.5") |
358.0mm (14.1") |
| Depth |
696.0mm (27.4") |
529.0mm (20.8") |
| Weight |
50.00kg (110lbs) |
13.91kg (30.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
2 Years |
| Labor Warranty |
5 years |
2 Years |