In this review, we will be comparing RP-1200SW and SB-4000, two Powered Subwoofer speakers from Klipsch and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and SVS SB-4000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200SWand SVS SB-4000 have a single woofer setup however the Klipsch RP-1200SW's woofer is 12-inch whereas the SVS SB-4000 features a 13.5-inch woofer.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas SB-4000 has a frequency range of 19-310 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the SB-4000's min frequency of 19Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-4000 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and SVS SB-4000's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch) whereas SVS SB-4000 has external dimensions of 466.0 x 453.0 x 532.0mm (18-5/16 x 17-13/16 x 20-15/16inch).
SVS SB-4000 is 16mm shorter and 127mm less deeper than Klipsch RP-1200SW but it is also 21mm wider.
Below you can see the front view size comparison of Klipsch RP-1200SW and SVS SB-4000 in scale.
Comparison image of Klipsch RP-1200SW and SVS SB-4000 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the SVS SB-4000 is approximately 2410.0cm2 / 373.6inch2. The RP-1200SW requires 18% more surface area than the SB-4000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the SVS SB-4000 weighs 46.50kg / 102.3lbs. This makes the SB-4000 49% heavier than the RP-1200SW.
Here is a comparison of how RP-1200SW and SB-4000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
17 Hz
vs
19 Hz
|
Generates deeper bass |
 Price per pair* |
1100USD
vs
1800USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
13.5 inches
vs
12 inches
|
Larger woofer |
 High Frequency Response |
310 Hz
vs
138 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
466mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2410cm2
vs
2846cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200SW needs about 18% more floor area. Klipsch RP-1200SW stands 127mm further into the room. Klipsch RP-1200SW is 16mm taller.
| General |
Klipsch Reference Premiere RP-1200SW |
SVS SB-4000 |
| Brand |
Klipsch |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
1200 watts |
| Frequency Response |
16.5-138 Hz |
19-310 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
1200-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
13.5" |
| Woofer Composition |
Cerametallic |
Composite/Glass Fiber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
482.0mm (19") |
466.0mm (18.3") |
| Width |
432.0mm (17") |
453.0mm (17.8") |
| Depth |
659.0mm (25.9") |
532.0mm (20.9") |
| Weight |
31.18kg (68.6lbs) |
46.50kg (102.3lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (17Hz vs 19Hz). |
| Amplifier power | B | SVS SB-4000 has the bigger amplifier - 1200W against 400W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | SVS SB-4000 moves more air: 13.5" against 12" is 1.27x the cone area, not the 1.13x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Klipsch RP-1200SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; SVS SB-4000 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Wireless option | depends | Only Klipsch RP-1200SW offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | SVS SB-4000 is about 18% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Klipsch RP-1200SW costs less - $1,100 against $1,800, about 39% less. |
A Klipsch RP-1200SW B SVS SB-4000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: SVS SB-4000 measures better, Klipsch RP-1200SW costs about 39% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch RP-1200SW will hit harder for the money; if it is mainly for music in a normal-sized room, SVS SB-4000 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $1,100 each, two Klipsch RP-1200SW cost about $2,200 against $1,800 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.