In this review, we will be comparing RP-1200SW and R-112SW, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and Klipsch R-112SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1200SW and Klipsch R-112SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200SWand Klipsch R-112SW have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas R-112SW has a frequency range of 24-125 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go significantly deeper on the low side and provide stronger bass compared to the R-112SW's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1200SW and Klipsch R-112SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and Klipsch R-112SW's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) whereas Klipsch R-112SW has external dimensions of 442.0 x 391.0 x 532.0mm ( 17-3/8 x 15-3/8 x 20-15/16inch) .
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 41mm wider, 40mm taller and 127mm deeper than Klipsch R-112SW.
Below you can see the front view size comparison of Klipsch RP-1200SW and Klipsch R-112SW in scale.
Comparison image of Klipsch RP-1200SW and Klipsch R-112SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the Klipsch R-112SW is approximately 2080.1cm2 / 322.4inch2. The RP-1200SW requires 37% more surface area than the R-112SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the Klipsch R-112SW weighs 22.16kg / 48.8lbs. This makes the RP-1200SW 41% heavier than the R-112SW.
Here is a comparison of how RP-1200SW and R-112SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
17 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
138k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
442mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2080cm2 (391x532mm)
vs
2846cm2 (432x659mm)
|
Takes less floor space |
 Price per pair* |
399USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-1200SW |
Klipsch Reference R-112SW |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
300 watts |
| Frequency Response |
16.5-138 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Cerametallic |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
482.0mm (19") |
442.0mm (17.4") |
| Width |
432.0mm (17") |
391.0mm (15.4") |
| Depth |
659.0mm (25.9") |
532.0mm (20.9") |
| Weight |
31.18kg (68.6lbs) |
22.16kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
2 Years |
| Labor Warranty |
5 years |
2 Years |