In this review, we will be comparing RP-1200SW and A100P, two Powered Subwoofer speakers from Klipsch and JBL. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and JBL Stage A100P first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200SWand JBL Stage A100P have a single woofer setup however the Klipsch RP-1200SW's woofer is 12-inch whereas the JBL Stage A100P features a 10-inch woofer.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas A100P has a frequency range of 35-150 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go significantly deeper on the low side and provide stronger bass compared to the A100P's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the JBL Stage A100P have Bass reflex type enclosure.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and JBL Stage A100P's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch) whereas JBL Stage A100P has external dimensions of 359.0 x 337.0 x 435.0mm (14-1/8 x 13-1/4 x 17-1/8inch).
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 95mm wider, 123mm taller and 224mm deeper than JBL Stage A100P.
Below you can see the front view size comparison of Klipsch RP-1200SW and JBL Stage A100P in scale.
Comparison image of Klipsch RP-1200SW and JBL Stage A100P Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the JBL Stage A100P is approximately 1466.0cm2 / 227.2inch2. The RP-1200SW requires 94% more surface area than the A100P which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the JBL Stage A100P weighs 13.66kg / 30.1lbs. This makes the RP-1200SW 128% heavier than the A100P.
Here is a comparison of how RP-1200SW and A100P's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
35 Hz
|
Generates deeper bass |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 High Frequency Response |
150 Hz
vs
138 Hz
|
Generates higher frequency |
 Height |
359mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1466cm2
vs
2846cm2
|
Takes less floor space |
 Price per pair* |
240USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200SW needs about 94% more floor area. Klipsch RP-1200SW stands 224mm further into the room. Klipsch RP-1200SW is 123mm taller.
| General |
Klipsch Reference Premiere RP-1200SW |
JBL Stage A100P |
| Brand |
Klipsch |
JBL |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
150 watts |
| Frequency Response |
16.5-138 Hz |
35-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Cerametallic |
Polycellulose |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
482.0mm (19") |
359.0mm (14.1") |
| Width |
432.0mm (17") |
337.0mm (13.3") |
| Depth |
659.0mm (25.9") |
435.0mm (17.1") |
| Weight |
31.18kg (68.6lbs) |
13.66kg (30.1lbs) |
| Enclosure |
Bass Reflex |
Bass reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
1 Year |
| Labor Warranty |
5 years |
1 Year |
Different price classes - Klipsch RP-1200SW costs roughly 4.6x what JBL Stage A100P does. Before paying it, read the note below about two smaller subwoofers.
| Area | Better | Why |
|---|
| Bass depth | A | Klipsch RP-1200SW goes deeper - 17Hz against 35Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | Klipsch RP-1200SW has the bigger amplifier - 400W against 150W RMS, about 4.3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Klipsch RP-1200SW moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Wireless option | depends | Only Klipsch RP-1200SW offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | JBL Stage A100P is about 62% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Klipsch RP-1200SW carries 5 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | JBL Stage A100P costs less - $240 against $1,100, about 78% less. |
A Klipsch RP-1200SW B JBL Stage A100P
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Klipsch RP-1200SW measures better, JBL Stage A100P costs about 78% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $240 each, two JBL Stage A100P cost about $480 against $1,100 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - JBL Stage A100P is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.