In this review, we will be comparing RP-1200SW and SuperSub X, two Powered Subwoofer speakers from Klipsch and GoldenEar. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and GoldenEar SuperSub X first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1200SW and GoldenEar SuperSub X compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200SW and GoldenEar SuperSub X have a totally different setup: the Klipsch RP-1200SW features 1 x 12-inch drivers whereas the SuperSub X features 2 x 8-inch drivers.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas SuperSub X has a frequency range of 12-250 Hz. With a minimum frequency of 12Hz, the SuperSub X can go significantly deeper on the low side and provide stronger bass compared to the RP-1200SW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the GoldenEar SuperSub X have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and GoldenEar SuperSub X's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) whereas GoldenEar SuperSub X has external dimensions of 324.0 x 356.0 x 388.0mm ( 12-3/4inch x 14inch x 15-1/4inch ) .
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 76mm wider, 158mm taller and 271mm deeper than GoldenEar SuperSub X.
Below you can see the front view size comparison of Klipsch RP-1200SW and GoldenEar SuperSub X in scale.
Comparison image of Klipsch RP-1200SW and GoldenEar SuperSub X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the GoldenEar SuperSub X is approximately 1381.3cm2 / 214.1inch2. The RP-1200SW requires 106% more surface area than the SuperSub X which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the GoldenEar SuperSub X weighs 18.18kg / 40lbs. This makes the RP-1200SW 72% heavier than the SuperSub X.
Here is a comparison of how RP-1200SW and SuperSub X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
 Price per pair* |
999USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
12 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
250k Hz
vs
138k Hz
|
Generates higher frequency |
 Passive Radiator |
two 10.5-inch x 9.5-inch
vs
None
|
Increases the bass performance |
 Height |
324mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1381cm2
vs
2846cm2
|
Takes less floor space |
| General |
Klipsch Reference Premiere RP-1200SW |
GoldenEar SuperSub X |
| Brand |
Klipsch |
GoldenEar |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
1400 watts |
| Frequency Response |
16.5-138 Hz |
12-250 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
1400-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Cerametallic |
Fiber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side |
Physical Specs |
|
|
| Height |
482.0mm (19") |
324.0mm (12.8") |
| Width |
432.0mm (17") |
356.0mm (14") |
| Depth |
659.0mm (25.9") |
388.0mm (15.3") |
| Weight |
31.18kg (68.6lbs) |
18.18kg (40lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
3 Years |
| Labor Warranty |
5 years |
3 Years |