In this review, we will be comparing RP-1200SW and ForceField 3, two Powered Subwoofer speakers from Klipsch and GoldenEar. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and GoldenEar ForceField 3 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200SWand GoldenEar ForceField 3 have a single woofer setup however the Klipsch RP-1200SW's woofer is 12-inch whereas the GoldenEar ForceField 3 features a 8-inch woofer.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas ForceField 3 has a frequency range of 18-250 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the ForceField 3's min frequency of 18Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the GoldenEar ForceField 3 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and GoldenEar ForceField 3's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch) whereas GoldenEar ForceField 3 has external dimensions of 288.0 x 293.0 x 432.0mm (11-5/16inch x 11-1/2inch x 17inch).
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 139mm wider, 194mm taller and 227mm deeper than GoldenEar ForceField 3.
Below you can see the front view size comparison of Klipsch RP-1200SW and GoldenEar ForceField 3 in scale.
Comparison image of Klipsch RP-1200SW and GoldenEar ForceField 3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the GoldenEar ForceField 3 is approximately 1265.8cm2 / 196.2inch2. The RP-1200SW requires 125% more surface area than the ForceField 3 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the GoldenEar ForceField 3 weighs 11.82kg / 26lbs. This makes the RP-1200SW 164% heavier than the ForceField 3.
Here is a comparison of how RP-1200SW and ForceField 3's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
18 Hz
|
Generates deeper bass |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 High Frequency Response |
250 Hz
vs
138 Hz
|
Generates higher frequency |
 Height |
288mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1265cm2
vs
2846cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200SW needs about 125% more floor area. Klipsch RP-1200SW stands 227mm further into the room. Klipsch RP-1200SW is 194mm taller.
| General |
Klipsch Reference Premiere RP-1200SW |
GoldenEar ForceField 3 |
| Brand |
Klipsch |
GoldenEar |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
1000 watts |
| Frequency Response |
16.5-138 Hz |
18-250 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
1000-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Cerametallic |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
482.0mm (19") |
288.0mm (11.3") |
| Width |
432.0mm (17") |
293.0mm (11.5") |
| Depth |
659.0mm (25.9") |
432.0mm (17") |
| Weight |
31.18kg (68.6lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Passive Radiator |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
3 Years |
| Labor Warranty |
5 years |
3 Years |
A ported subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (17Hz vs 18Hz). |
| Amplifier power | B | GoldenEar ForceField 3 has the bigger amplifier - 1000W against 400W RMS, about 4dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Klipsch RP-1200SW moves more air: 12" against 8" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Klipsch RP-1200SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; GoldenEar ForceField 3 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | GoldenEar ForceField 3 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only Klipsch RP-1200SW offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Phase control | A | Klipsch RP-1200SW has a phase control. Without one, the only way to fix a cancellation at the crossover is to move the box. |
| Cabinet size | depends | GoldenEar ForceField 3 is about 73% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Klipsch RP-1200SW carries 5 years on parts against 3 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | GoldenEar ForceField 3 costs less - $599 against $1,100, about 46% less. |
A Klipsch RP-1200SW B GoldenEar ForceField 3
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-1200SW is ahead, but on only 1 of the measured areas, and it costs about 84% more. GoldenEar ForceField 3 is the sensible buy unless your room is large enough to need the extra. Check your amplifier first: if it has no subwoofer or preamp output, GoldenEar ForceField 3 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $599 each, two GoldenEar ForceField 3 cost about $1,198 against $1,100 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.