In this review, we will be comparing RP-1200SW and Sub 6, two Powered Subwoofer speakers from Klipsch and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and Dynaudio Sub 6 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1200SW and Dynaudio Sub 6 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200SWand Dynaudio Sub 6 have a single woofer setup however the Klipsch RP-1200SW's woofer is 12-inch whereas the Dynaudio Sub 6 features a 9.5-inch woofer.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas Sub 6 has a frequency range of 16-230 Hz. With a minimum frequency of 16Hz, the Sub 6 can go slightly deeper then the RP-1200SW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Dynaudio Sub 6 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and Dynaudio Sub 6's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) whereas Dynaudio Sub 6 has external dimensions of 334.0 x 477.0 x 312.0mm ( 13-1/8 x 18-3/4 x 12-1/4inch) .
Dynaudio Sub 6 is 148mm shorter and 347mm less deeper than Klipsch RP-1200SW but it is also 45mm wider.
Below you can see the front view size comparison of Klipsch RP-1200SW and Dynaudio Sub 6 in scale.
Comparison image of Klipsch RP-1200SW and Dynaudio Sub 6 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the Dynaudio Sub 6 is approximately 1488.2cm2 / 230.7inch2. The RP-1200SW requires 91% more surface area than the Sub 6 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the Dynaudio Sub 6 weighs 20.55kg / 45.2lbs. This makes the RP-1200SW 52% heavier than the Sub 6.
Here is a comparison of how RP-1200SW and Sub 6's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
9.5 inches
|
Larger woofer |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Low Frequency Response |
16 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
230k Hz
vs
138k Hz
|
Generates higher frequency |
 Height |
334mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1488cm2
vs
2846cm2
|
Takes less floor space |
| General |
Klipsch Reference Premiere RP-1200SW |
Dynaudio Sub 6 |
| Brand |
Klipsch |
Dynaudio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
500 watts |
| Frequency Response |
16.5-138 Hz |
16-230 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
500-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
9.5" |
| Woofer Composition |
Cerametallic |
Magnesium Silicate Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side |
Physical Specs |
|
|
| Height |
482.0mm (19") |
334.0mm (13.1") |
| Width |
432.0mm (17") |
477.0mm (18.8") |
| Depth |
659.0mm (25.9") |
312.0mm (12.3") |
| Weight |
31.18kg (68.6lbs) |
20.55kg (45.2lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
3 Years |
| Labor Warranty |
5 years |
3 Years |