In this review, we will be comparing RP-1200SW and DB3D, two Powered Subwoofer speakers from Klipsch and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and B&W DB3D first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1200SW and B&W DB3D compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200SW and B&W DB3D have a totally different setup: the Klipsch RP-1200SW features 1 x 12-inch drivers whereas the DB3D features 2 x 8-inch drivers.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas DB3D has a frequency range of 10-350Hz. With a minimum frequency of 10Hz, the DB3D can go significantly deeper on the low side and provide stronger bass compared to the RP-1200SW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB3D have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and B&W DB3D's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) whereas B&W DB3D has external dimensions of ( ) .
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 432mm wider, 482mm taller and 659mm deeper than B&W DB3D.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the B&W DB3D weighs 25.05kg / 55.1lbs. This makes the RP-1200SW 24% heavier than the DB3D.
Here is a comparison of how RP-1200SW and DB3D's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
 Price per pair* |
999USD
vs
3499USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
10 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
350k Hz
vs
138k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
0mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
0cm2
vs
2846cm2
|
Takes less floor space |
| General |
Klipsch Reference Premiere RP-1200SW |
Bowers & Wilkins DB3D |
| Brand |
Klipsch |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
1000 watts |
| Frequency Response |
16.5-138 Hz |
10-350Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
1000-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Cerametallic |
|
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
482.0mm (19") |
mm (0") |
| Width |
432.0mm (17") |
mm (0") |
| Depth |
659.0mm (25.9") |
mm (0") |
| Weight |
31.18kg (68.6lbs) |
25.05kg (55.1lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
2 Years |
| Labor Warranty |
5 years |
2 Years |