In this review, we will be comparing RP-1200CSW and KC62, two Powered Subwoofer speakers from Klipsch and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200CSW and KEF KC62 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200CSW and KEF KC62 have a totally different setup: the Klipsch RP-1200CSW features 1 x 12-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
RP-1200CSW has a frequency range of 17-160 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the RP-1200CSW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1200CSW and KEF KC62 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200CSW's and KEF KC62's external dimensions. Klipsch RP-1200CSW has external dimensions of 399.5 x 376.9 x 416.1mm (15.73inch x 14.84inch x 16.38inch) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm (9-5/8inch x 10-1/8inch x 11-1/16inch).
Klipsch RP-1200CSW is clearly the larger of the two speakers. Its body is 118.9mm wider, 154.5mm taller and 135.1mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200CSW is approximately 1568.3cm2 / 243.1inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The RP-1200CSW requires 116% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200CSW weighs 21.64kg / 47.6lbs and the KEF KC62 weighs 14.05kg / 30.9lbs. This makes the RP-1200CSW 54% heavier than the KC62.
Here is a comparison of how RP-1200CSW and KC62's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
6.5 inches
|
Larger woofer |
 Price per pair* |
850USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
160 Hz
|
Generates higher frequency |
 Height |
245mm
vs
399mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2
vs
1568cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200CSW needs about 116% more floor area. Klipsch RP-1200CSW stands 135mm further into the room. Klipsch RP-1200CSW is 155mm taller.
| General |
Klipsch Reference Premiere RP-1200CSW |
KEF KC62 |
| Brand |
Klipsch |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
1000 watts |
| Frequency Response |
17-160 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
1000-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
6.5" |
| Woofer Composition |
Cerametallic |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
side |
Physical Specs |
|
|
| Height |
399.5mm (15.7") |
245.0mm (9.6") |
| Width |
376.9mm (14.8") |
258.0mm (10.2") |
| Depth |
416.1mm (16.4") |
281.0mm (11.1") |
| Weight |
21.64kg (47.6lbs) |
14.05kg (30.9lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | KEF KC62 goes deeper - 11Hz against 17Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | KEF KC62 has the bigger amplifier - 1000W against 400W RMS, about 4dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Klipsch RP-1200CSW moves more air: 12" against 2 x 6.5" is 1.7x the cone area, not the 1.31x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | KEF KC62 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | Klipsch RP-1200CSW fires front and KEF KC62 fires side. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | KEF KC62 is about 72% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Klipsch RP-1200CSW costs less - $850 against $1,500, about 43% less. |
A Klipsch RP-1200CSW B KEF KC62
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: KEF KC62 measures better, Klipsch RP-1200CSW costs about 43% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, KEF KC62 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $850 each, two Klipsch RP-1200CSW cost about $1,700 against $1,500 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.