In this review, we will be comparing RP-1200CSW and ASW610, two Powered Subwoofer speakers from Klipsch and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200CSW and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200CSWand B&W ASW610 have a single woofer setup however the Klipsch RP-1200CSW's woofer is 12-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
RP-1200CSW has a frequency range of 17-160 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 17Hz, the RP-1200CSW can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1200CSW and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200CSW's and B&W ASW610's external dimensions. Klipsch RP-1200CSW has external dimensions of 399.5 x 376.9 x 416.1mm (15.73inch x 14.84inch x 16.38inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Klipsch RP-1200CSW is clearly the larger of the two speakers. Its body is 64.9mm wider, 78.5mm taller and 22.1mm deeper than B&W ASW610.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200CSW is approximately 1568.3cm2 / 243.1inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The RP-1200CSW requires 28% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200CSW weighs 21.64kg / 47.6lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the RP-1200CSW 72% heavier than the ASW610.
Here is a comparison of how RP-1200CSW and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
160 Hz
vs
140 Hz
|
Generates higher frequency |
 Price per pair* |
850USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
321mm
vs
399mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1568cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200CSW needs about 28% more floor area. Klipsch RP-1200CSW stands 22mm further into the room. Klipsch RP-1200CSW is 79mm taller.
| General |
Klipsch Reference Premiere RP-1200CSW |
Bowers & Wilkins ASW610 |
| Brand |
Klipsch |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
200 watts |
| Frequency Response |
17-160 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Cerametallic |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
399.5mm (15.7") |
321.0mm (12.6") |
| Width |
376.9mm (14.8") |
312.0mm (12.3") |
| Depth |
416.1mm (16.4") |
394.0mm (15.5") |
| Weight |
21.64kg (47.6lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | Klipsch RP-1200CSW goes deeper - 17Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | Klipsch RP-1200CSW has the bigger amplifier - 400W against 200W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Klipsch RP-1200CSW moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW610 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only Klipsch RP-1200CSW offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | B&W ASW610 is about 37% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Klipsch RP-1200CSW costs less - $850 against $899, about 5% less. |
A Klipsch RP-1200CSW B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-1200CSW has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW610 is the only one of these two you can connect at all. If placement is the constraint - a corner, behind a sofa, under a desk - B&W ASW610 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.