In this review, we will be comparing Flexus Sub 100 and SPL-120, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch Flexus Sub 100 and Klipsch SPL-120 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch Flexus Sub 100 and Klipsch SPL-120 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch Flexus Sub 100and Klipsch SPL-120 have a single woofer setup however the Klipsch Flexus Sub 100's woofer is 10-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
Flexus Sub 100 has a frequency range of 26-250 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 24Hz, the SPL-120 can go slightly deeper then the Flexus Sub 100's min frequency of 26Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch Flexus Sub 100 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-120 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch Flexus Sub 100's and Klipsch SPL-120's external dimensions. Klipsch Flexus Sub 100 has external dimensions of 340.0 x 335.0 x 349.0mm ( 13-3/8 x 13-3/16 x 13-3/4inch) whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm ( 17-11/16 x 14-3/4 x 21-1/4inch) .
Klipsch SPL-120 is clearly the larger of the two speakers. Its body is 40mm wider, 110mm taller and 191mm deeper than Klipsch Flexus Sub 100.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch Flexus Sub 100 is approximately 1169.2cm2 / 181.2inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The Flexus Sub 100 requires 42% less surface area than the SPL-120 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch Flexus Sub 100 weighs 9.40kg / 20.7lbs and the Klipsch SPL-120 weighs 20.45kg / 45lbs. This makes the SPL-120 118% heavier than the Flexus Sub 100.
Here is a comparison of how Flexus Sub 100 and SPL-120's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
250k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
340mm
vs
450mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1169cm2
vs
2025cm2
|
Takes less floor space |
 Price per pair* |
350USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
26 Hz
|
Generates deeper bass |
| General |
Klipsch Flexus Sub 100 |
Klipsch SPL-120 |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
80 watts |
300 watts |
| Frequency Response |
26-250 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
80-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
160-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Paper |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
340.0mm (13.4") |
450.0mm (17.7") |
| Width |
335.0mm (13.2") |
375.0mm (14.8") |
| Depth |
349.0mm (13.7") |
540.0mm (21.3") |
| Weight |
9.40kg (20.7lbs) |
20.45kg (45lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |