In this review, we will be comparing SUB8 v2 and SW-15, two Powered Subwoofer speakers from Kanto and Wharfedale. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Kanto SUB8 v2 and Wharfedale SW-15 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Kanto SUB8 v2and Wharfedale SW-15 have a single woofer setup however the Kanto SUB8 v2's woofer is 8-inch whereas the Wharfedale SW-15 features a 15-inch woofer.
Frequency Response
SUB8 v2 has a frequency range of 35-175 Hz whereas SW-15 has a frequency range of 30-120 Hz. With a minimum frequency of 30Hz, the SW-15 can go significantly deeper on the low side and provide stronger bass compared to the SUB8 v2's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Kanto SUB8 v2 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Wharfedale SW-15 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
New
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto SUB8 v2's and Wharfedale SW-15's external dimensions. Kanto SUB8 v2 has external dimensions of 302.0 x 281.0 x 326.0mm (11-7/8inch x 11-1/16inch x 12-13/16inch) whereas Wharfedale SW-15 has external dimensions of 570.0 x 493.0 x 615.0mm (22-7/16inch x 19-3/8inch x 24-3/16inch).
Wharfedale SW-15 is clearly the larger of the two speakers. Its body is 212mm wider, 268mm taller and 289mm deeper than Kanto SUB8 v2.
Below you can see the front view size comparison of Kanto SUB8 v2 and Wharfedale SW-15 in scale.
Comparison image of Kanto SUB8 v2 and Wharfedale SW-15 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto SUB8 v2 is approximately 916.1cm2 / 142.0inch2 and base area of the Wharfedale SW-15 is approximately 3032.0cm2 / 470.0inch2. The SUB8 v2 requires 70% less surface area than the SW-15 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Kanto SUB8 v2 weighs 7.82kg / 17.2lbs and the Wharfedale SW-15 weighs 31.57kg / 69.5lbs. This makes the SW-15 304% heavier than the SUB8 v2.
Here is a comparison of how SUB8 v2 and SW-15's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Kanto SUB8 v2?
Here are the items that are included inside the box of SUB8 v2:
- Powered subwoofer
- 6-feet AC power cord
- 10-feet mono-RCA cable
- User Manual
- User Manual Language Update Note
What's in the Box of Wharfedale SW-15?
Here are the items that come with the SW-15:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- User-feets Manual
High Frequency Response |
175 Hz
vs
120 Hz
|
Generates higher frequency |
Height |
302mm
vs
570mm
|
Easier to fit in smaller spaces |
Base Surface Area |
916cm2
vs
3032cm2
|
Takes less floor space |
Price per pair* |
240USD
vs
1199USD
|
costs less (*prices may change depending on the seller, location and time) |
Woofer Size |
15 inches
vs
8 inches
|
Larger woofer |
Low Frequency Response |
30 Hz
vs
35 Hz
|
Generates deeper bass |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Wharfedale SW-15 needs about 231% more floor area. Wharfedale SW-15 stands 289mm further into the room. Wharfedale SW-15 is 268mm taller.
| General |
Kanto SUB8 v2 |
Wharfedale SW-15 |
| Brand |
Kanto |
Wharfedale |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
400 watts |
| Frequency Response |
35-175 Hz |
30-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
400-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
15" |
| Woofer Composition |
Paper |
Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
302.0mm (11.9") |
570.0mm (22.4") |
| Width |
281.0mm (11.1") |
493.0mm (19.4") |
| Depth |
326.0mm (12.8") |
615.0mm (24.2") |
| Weight |
7.82kg (17.2lbs) |
31.57kg (69.5lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Wharfedale SW-15 goes deeper - 30Hz against 35Hz. A real difference, though most music has little content below 35Hz. |
| Amplifier power | B | Wharfedale SW-15 has the bigger amplifier - 400W against 150W RMS, about 4.3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | Wharfedale SW-15 moves more air: 15" against 8" is 3.52x the cone area, not the 1.88x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Kanto SUB8 v2 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Wharfedale SW-15 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Kanto SUB8 v2 is about 84% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | Wharfedale SW-15 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Kanto SUB8 v2 costs less - $240 against $1,199, about 80% less. |
A Kanto SUB8 v2 B Wharfedale SW-15
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Wharfedale SW-15 measures better, Kanto SUB8 v2 costs about 80% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Wharfedale SW-15 will hit harder for the money; if it is mainly for music in a normal-sized room, Kanto SUB8 v2 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $240 each, two Kanto SUB8 v2 cost about $480 against $1,199 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.