In this review, we will be comparing SUB6 and SA-CS9, two Powered Subwoofer speakers from Kanto and Sony. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Kanto SUB6 and Sony SA-CS9 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Kanto SUB6and Sony SA-CS9 have a single woofer setup however the Kanto SUB6's woofer is 6-inch whereas the Sony SA-CS9 features a 10-inch woofer.
Frequency Response
SUB6 has a frequency range of 35-165 Hz whereas SA-CS9 has a frequency range of 28-200 Hz. With a minimum frequency of 28Hz, the SA-CS9 can go significantly deeper on the low side and provide stronger bass compared to the SUB6's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto SUB6's and Sony SA-CS9's external dimensions. Kanto SUB6 has external dimensions of 241.3 x 222.3 x 266.7mm () whereas Sony SA-CS9 has external dimensions of 345.0 x 295.0 x 400.0mm (11.6 x 13.6 x 15.7 inch).
Sony SA-CS9 is clearly the larger of the two speakers. Its body is 72.7mm wider, 103.7mm taller and 133.3mm deeper than Kanto SUB6.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sony SA-CS9 needs about 99% more floor or shelf area. Sony SA-CS9 is 133mm deeper, so it stands that much further out from the wall. Sony SA-CS9 is 104mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto SUB6 is approximately 592.9cm2 / 91.9inch2 and base area of the Sony SA-CS9 is approximately 1180.0cm2 / 182.9inch2. The SUB6 requires 50% less surface area than the SA-CS9 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Kanto SUB6 weighs 5.31kg / 11.7lbs and the Sony SA-CS9 weighs 11.50kg / 25.3lbs. This makes the SA-CS9 117% heavier than the SUB6.
Here is a comparison of how SUB6 and SA-CS9's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Height |
241mm
vs
345mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
592cm2
vs
1180cm2
|
Takes less floor space |
 Woofer Size |
10 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
165 Hz
|
Generates higher frequency |
 Price per pair* |
248USD
vs
300USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Sony SA-CS9 needs about 99% more floor area. Sony SA-CS9 stands 133mm further into the room. Sony SA-CS9 is 104mm taller.
| General |
Kanto SUB6 |
Sony SA-CS9 |
| Brand |
Kanto |
Sony |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
35-165 Hz |
28-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
115-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
10" |
| Woofer Composition |
|
foamed-mica cellular reinforced |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
241.3mm (9.5") |
345.0mm (13.6") |
| Width |
222.3mm (8.8") |
295.0mm (11.6") |
| Depth |
266.7mm (10.5") |
400.0mm (15.7") |
| Weight |
5.31kg (11.7lbs) |
11.50kg (25.3lbs) |
| Enclosure |
|
Bass Reflex |
| Available Colors |
n/a |
Black |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
|
| Labor Warranty |
2 Years |
|
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Sony SA-CS9 goes deeper - 28Hz against 35Hz. A real difference, though most music has little content below 35Hz. |
| Amplifier power | evenly matched | Much the same amplifier (100W vs 115W RMS) - under 1dB apart. |
| Driver area | B | Sony SA-CS9 moves more air: 10" against 6" is 2.78x the cone area, not the 1.67x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Kanto SUB6 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Sony SA-CS9 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Kanto SUB6 is about 65% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | Sony SA-CS9 costs less - $248 against $300, about 17% less. |
A Kanto SUB6 B Sony SA-CS9
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Sony SA-CS9 is the easier recommendation: it leads on most of the measured areas and costs less. Take Kanto SUB6 if one of the "depends" rows describes your room. Films or music? If this is mainly a home cinema, Sony SA-CS9 will hit harder for the money; if it is mainly for music in a normal-sized room, Kanto SUB6 is usually the easier one to make sound right. If placement is the constraint - a corner, behind a sofa, under a desk - Kanto SUB6 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.