In this review, we will be comparing SUB6 and SPL-120, two Powered Subwoofer speakers from Kanto and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Kanto SUB6 and Klipsch SPL-120 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Kanto SUB6and Klipsch SPL-120 have a single woofer setup however the Kanto SUB6's woofer is 6-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
SUB6 has a frequency range of 35-165 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 24Hz, the SPL-120 can go significantly deeper on the low side and provide stronger bass compared to the SUB6's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto SUB6's and Klipsch SPL-120's external dimensions. Kanto SUB6 has external dimensions of 241.3 x 222.3 x 266.7mm () whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm (17-11/16 x 14-3/4 x 21-1/4inch).
Klipsch SPL-120 is clearly the larger of the two speakers. Its body is 152.7mm wider, 208.7mm taller and 273.3mm deeper than Kanto SUB6.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Klipsch SPL-120 needs about 242% more floor or shelf area. Klipsch SPL-120 is 273mm deeper, so it stands that much further out from the wall. Klipsch SPL-120 is 209mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto SUB6 is approximately 592.9cm2 / 91.9inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The SUB6 requires 71% less surface area than the SPL-120 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Kanto SUB6 weighs 5.31kg / 11.7lbs and the Klipsch SPL-120 weighs 20.45kg / 45lbs. This makes the SPL-120 285% heavier than the SUB6.
Here is a comparison of how SUB6 and SPL-120's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
165 Hz
vs
125 Hz
|
Generates higher frequency |
 Height |
241mm
vs
450mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
592cm2
vs
2025cm2
|
Takes less floor space |
 Price per pair* |
300USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
12 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
35 Hz
|
Generates deeper bass |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch SPL-120 needs about 242% more floor area. Klipsch SPL-120 stands 273mm further into the room. Klipsch SPL-120 is 209mm taller.
| General |
Kanto SUB6 |
Klipsch SPL-120 |
| Brand |
Kanto |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
35-165 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
12" |
| Woofer Composition |
|
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
241.3mm (9.5") |
450.0mm (17.7") |
| Width |
222.3mm (8.8") |
375.0mm (14.8") |
| Depth |
266.7mm (10.5") |
540.0mm (21.3") |
| Weight |
5.31kg (11.7lbs) |
20.45kg (45lbs) |
| Enclosure |
|
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Klipsch SPL-120 goes deeper - 24Hz against 35Hz. That gap covers the lowest notes of a five-string bass and a concert bass drum. |
| Amplifier power | B | Klipsch SPL-120 has the bigger amplifier - 300W against 100W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | Klipsch SPL-120 moves more air: 12" against 6" is 4x the cone area, not the 2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Kanto SUB6 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch SPL-120 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Kanto SUB6 is about 84% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Kanto SUB6 costs less - $300 against $499, about 40% less. |
A Kanto SUB6 B Klipsch SPL-120
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Klipsch SPL-120 measures better, Kanto SUB6 costs about 40% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch SPL-120 will hit harder for the money; if it is mainly for music in a normal-sized room, Kanto SUB6 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $300 each, two Kanto SUB6 cost about $600 against $499 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.