In this review, we will be comparing SUB6 v2 and A120P, two Powered Subwoofer speakers from Kanto and JBL. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Kanto SUB6 v2 and JBL Stage A120P first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Kanto SUB6 v2 and JBL Stage A120P compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Kanto SUB6 v2and JBL Stage A120P have a single woofer setup however the Kanto SUB6 v2's woofer is 6-inch whereas the JBL Stage A120P features a 12-inch woofer.
Frequency Response
SUB6 v2 has a frequency range of 40-175 Hz whereas A120P has a frequency range of 32-150 Hz. With a minimum frequency of 32Hz, the A120P can go significantly deeper on the low side and provide stronger bass compared to the SUB6 v2's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Kanto SUB6 v2 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the JBL Stage A120P have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto SUB6 v2's and JBL Stage A120P's external dimensions. Kanto SUB6 v2 has external dimensions of 241.0 x 220.0 x 220.0mm ( 9-1/2 x 8-11/16 x 8-11/16inch) whereas JBL Stage A120P has external dimensions of 415.0 x 393.0 x 475.0mm ( 16-5/16 x 15-7/16 x 18-11/16inch) .
JBL Stage A120P is clearly the larger of the two speakers. Its body is 173mm wider, 174mm taller and 255mm deeper than Kanto SUB6 v2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto SUB6 v2 is approximately 484.0cm2 / 75.0inch2 and base area of the JBL Stage A120P is approximately 1866.8cm2 / 289.4inch2. The SUB6 v2 requires 74% less surface area than the A120P which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Kanto SUB6 v2 weighs 5.00kg / 11lbs and the JBL Stage A120P weighs 18.68kg / 41.1lbs. This makes the A120P 274% heavier than the SUB6 v2.
Here is a comparison of how SUB6 v2 and A120P's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
175k Hz
vs
150k Hz
|
Generates higher frequency |
 Height |
241mm
vs
415mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
484cm2
vs
1866cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
40 Hz
|
Generates deeper bass |
| General |
Kanto SUB6 v2 |
JBL Stage A120P |
| Brand |
Kanto |
JBL |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
250 watts |
| Frequency Response |
40-175 Hz |
32-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
250-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
12" |
| Woofer Composition |
Paper |
Polycellulose |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
Variable low pass |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
241.0mm (9.5") |
415.0mm (16.3") |
| Width |
220.0mm (8.7") |
393.0mm (15.5") |
| Depth |
220.0mm (8.7") |
475.0mm (18.7") |
| Weight |
5.00kg (11lbs) |
18.68kg (41.1lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |