In this review, we will be comparing Kube 15 MIE and SPL-120, two Powered Subwoofer speakers from KEF and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 15 MIE and Klipsch SPL-120 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF Kube 15 MIEand Klipsch SPL-120 have a single woofer setup however the KEF Kube 15 MIE's woofer is 15-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
Kube 15 MIE has a frequency range of 20-140 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 20Hz, the Kube 15 MIE can go slightly deeper then the SPL-120's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF Kube 15 MIE has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-120 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 15 MIE's and Klipsch SPL-120's external dimensions. KEF Kube 15 MIE has external dimensions of 519 x 500 x 515 mm (20.4 x 19.7 x 20.3 in) whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm (17-11/16 x 14-3/4 x 21-1/4inch).
Klipsch SPL-120 is 125mm narrower and 69mm shorter than KEF Kube 15 MIE but it is also 25mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 15 MIE is approximately 2575.0cm2 / 399.1inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The Kube 15 MIE requires 27% more surface area than the SPL-120 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 15 MIE weighs 27.50kg / 60.5lbs and the Klipsch SPL-120 weighs 20.45kg / 45lbs. This makes the Kube 15 MIE 34% heavier than the SPL-120.
Here is a comparison of how Kube 15 MIE and SPL-120's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 15 MIE?
Here are the items that are included inside the box of Kube 15 MIE:
- Kube 15 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of Klipsch SPL-120?
Here are the items that come with the SPL-120:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Woofer Size |
15 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
140k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
450mm
vs
519mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2025cm2
vs
2575cm2
|
Takes less floor space |
 Price per pair* |
499USD
vs
1399USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF Kube 15 MIE |
Klipsch SPL-120 |
| Brand |
KEF |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
300 watts |
| Frequency Response |
20-140 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
n/a |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
12" |
| Woofer Composition |
Polypropylene |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
519.0mm (20.4") |
450.0mm (17.7") |
| Width |
500.0mm (19.7") |
375.0mm (14.8") |
| Depth |
515.0mm (20.3") |
540.0mm (21.3") |
| Weight |
27.50kg (60.5lbs) |
20.45kg (45lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |