In this review, we will be comparing Kube 12 MIE and KUBE 8b, two Powered Subwoofer speakers by KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 12 MIE and KEF KUBE 8b first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF Kube 12 MIEand KEF KUBE 8b have a single woofer setup however the KEF Kube 12 MIE's woofer is 12-inch whereas the KEF KUBE 8b features a 8-inch woofer.
Frequency Response
Kube 12 MIE has a frequency range of 22-140 Hz whereas KUBE 8b has a frequency range of 34-140 Hz. With a minimum frequency of 22Hz, the Kube 12 MIE can go significantly deeper on the low side and provide stronger bass compared to the KUBE 8b's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF Kube 12 MIE and KEF KUBE 8b have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 12 MIE's and KEF KUBE 8b's external dimensions. KEF Kube 12 MIE has external dimensions of 410 x 393 x 410 mm (16.1 x 15.5 x 16.1 in) whereas KEF KUBE 8b has external dimensions of 294.0 x 296.0 x 339.0mm (11-9/16 x 11-5/8 x 13-5/16inch).
KEF Kube 12 MIE is clearly the larger of the two speakers. Its body is 97mm wider, 116mm taller and 71mm deeper than KEF KUBE 8b.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 12 MIE is approximately 1611.3cm2 / 249.8inch2 and base area of the KEF KUBE 8b is approximately 1003.4cm2 / 155.5inch2. The Kube 12 MIE requires 61% more surface area than the KUBE 8b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 12 MIE weighs 18.60kg / 40.9lbs and the KEF KUBE 8b weighs 11.36kg / 25lbs. This makes the Kube 12 MIE 64% heavier than the KUBE 8b.
Here is a comparison of how Kube 12 MIE and KUBE 8b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 12 MIE?
Here are the items that are included inside the box of Kube 12 MIE:
- Kube 12 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of KEF KUBE 8b?
Here are the items that come with the KUBE 8b:
- Powered subwoofer
- 6.5-feet AC power cord
- Speaker-level input block
- User Manual
- Important Safety Information
- Warranty Information
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
22 Hz
vs
34 Hz
|
Generates deeper bass |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
294mm
vs
410mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1003cm2
vs
1611cm2
|
Takes less floor space |
 Price per pair* |
600USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
KEF Kube 12 MIE needs about 61% more floor area. KEF Kube 12 MIE stands 71mm further into the room. KEF Kube 12 MIE is 116mm taller.
| General |
KEF Kube 12 MIE |
KEF KUBE 8b |
| Brand |
KEF |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
300 watts |
| Frequency Response |
22-140 Hz |
34-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Polypropylene |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
40-140 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
410.0mm (16.1") |
294.0mm (11.6") |
| Width |
393.0mm (15.5") |
296.0mm (11.7") |
| Depth |
410.0mm (16.1") |
339.0mm (13.3") |
| Weight |
18.60kg (40.9lbs) |
11.36kg (25lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | A | KEF Kube 12 MIE goes deeper - 22Hz against 34Hz. That gap covers the lowest notes of a five-string bass and a concert bass drum. |
| Amplifier power | evenly matched | Much the same amplifier (300W vs 300W RMS) - under 1dB apart. |
| Driver area | A | KEF Kube 12 MIE moves more air: 12" against 8" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Setup and tuning | evenly matched | The same tuning tools on both (room correction and onboard DSP). |
| Speaker-level inputs | A | KEF Kube 12 MIE takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only KEF Kube 12 MIE offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | KEF KUBE 8b is about 55% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | KEF KUBE 8b costs less - $600 against $999, about 40% less. |
A KEF Kube 12 MIE B KEF KUBE 8b
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: KEF Kube 12 MIE measures better, KEF KUBE 8b costs about 40% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, KEF Kube 12 MIE is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $600 each, two KEF KUBE 8b cost about $1,200 against $999 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.