In this review, we will be comparing Kube 12 MIE and KC62, two Powered Subwoofer speakers by KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 12 MIE and KEF KC62 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF Kube 12 MIE and KEF KC62 have a totally different setup: the KEF Kube 12 MIE features 1 x 12-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
Kube 12 MIE has a frequency range of 22-140 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the Kube 12 MIE's min frequency of 22Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF Kube 12 MIE and KEF KC62 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 12 MIE's and KEF KC62's external dimensions. KEF Kube 12 MIE has external dimensions of 410 x 393 x 410 mm (16.1 x 15.5 x 16.1 in) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm (9-5/8inch x 10-1/8inch x 11-1/16inch).
KEF Kube 12 MIE is clearly the larger of the two speakers. Its body is 135mm wider, 165mm taller and 129mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 12 MIE is approximately 1611.3cm2 / 249.8inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The Kube 12 MIE requires 122% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 12 MIE weighs 18.60kg / 40.9lbs and the KEF KC62 weighs 14.05kg / 30.9lbs. This makes the Kube 12 MIE 32% heavier than the KC62.
Here is a comparison of how Kube 12 MIE and KC62's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 12 MIE?
Here are the items that are included inside the box of Kube 12 MIE:
- Kube 12 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of KEF KC62?
Here are the items that come with the KC62:
- Powered subwoofer
- 6.5-feet AC power cord
- Speaker-level input block
- User Manual
- Important Safety Information
- Warranty Information
 Woofer Size |
12 inches
vs
6.5 inches
|
Larger woofer |
 Price per pair* |
999USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
22 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 Height |
245mm
vs
410mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2
vs
1611cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
KEF Kube 12 MIE needs about 122% more floor area. KEF Kube 12 MIE stands 129mm further into the room. KEF Kube 12 MIE is 165mm taller.
| General |
KEF Kube 12 MIE |
KEF KC62 |
| Brand |
KEF |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
1000 watts |
| Frequency Response |
22-140 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
6.5" |
| Woofer Composition |
Polypropylene |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
side |
Physical Specs |
|
|
| Height |
410.0mm (16.1") |
245.0mm (9.6") |
| Width |
393.0mm (15.5") |
258.0mm (10.2") |
| Depth |
410.0mm (16.1") |
281.0mm (11.1") |
| Weight |
18.60kg (40.9lbs) |
14.05kg (30.9lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | KEF KC62 goes deeper - 11Hz against 22Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | KEF KC62 has the bigger amplifier - 1000W against 300W RMS, about 5.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | KEF Kube 12 MIE moves more air: 12" against 2 x 6.5" is 1.7x the cone area, not the 1.31x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Setup and tuning | evenly matched | The same tuning tools on both (room correction and onboard DSP). |
| Cabinet size | depends | KEF KC62 is about 73% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | KEF Kube 12 MIE costs less - $999 against $1,500, about 33% less. |
A KEF Kube 12 MIE B KEF KC62
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF KC62 is ahead, but on only 1 of the measured areas, and it costs about 50% more. KEF Kube 12 MIE is the sensible buy unless your room is large enough to need the extra. If placement is the constraint - a corner, behind a sofa, under a desk - KEF KC62 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.