In this review, we will be comparing Kube 10 MIE and A120P, two Powered Subwoofer speakers from KEF and JBL. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 10 MIE and JBL Stage A120P first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF Kube 10 MIEand JBL Stage A120P have a single woofer setup however the KEF Kube 10 MIE's woofer is 10-inch whereas the JBL Stage A120P features a 12-inch woofer.
Frequency Response
Kube 10 MIE has a frequency range of 20-140 Hz whereas A120P has a frequency range of 32-150 Hz. With a minimum frequency of 20Hz, the Kube 10 MIE can go significantly deeper on the low side and provide stronger bass compared to the A120P's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF Kube 10 MIE has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the JBL Stage A120P have Bass reflex type enclosure.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 10 MIE's and JBL Stage A120P's external dimensions. KEF Kube 10 MIE has external dimensions of 370 x 353 x 370 mm (14.6 x 13.9 x 14.6 in) whereas JBL Stage A120P has external dimensions of 415.0 x 393.0 x 475.0mm (16-5/16 x 15-7/16 x 18-11/16inch).
JBL Stage A120P is clearly the larger of the two speakers. Its body is 40mm wider, 45mm taller and 105mm deeper than KEF Kube 10 MIE.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 10 MIE is approximately 1306.1cm2 / 202.4inch2 and base area of the JBL Stage A120P is approximately 1866.8cm2 / 289.4inch2. The Kube 10 MIE requires 30% less surface area than the A120P which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 10 MIE weighs 15.40kg / 33.9lbs and the JBL Stage A120P weighs 18.68kg / 41.1lbs. This makes the A120P 21% heavier than the Kube 10 MIE.
Here is a comparison of how Kube 10 MIE and A120P's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 10 MIE?
Here are the items that are included inside the box of Kube 10 MIE:
- Kube 10 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of JBL Stage A120P?
Here are the items that come with the A120P:
- Powered subwoofer
- Grille
- 6-feet AC power cord
- 4 Spike feet
- Owners Manual
- Warranty Card
- Important Safety Instructions
 Low Frequency Response |
20 Hz
vs
32 Hz
|
Generates deeper bass |
 Height |
370mm
vs
415mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1306cm2
vs
1866cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
 Price per pair* |
300USD
vs
799USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
JBL Stage A120P needs about 43% more floor area. JBL Stage A120P stands 105mm further into the room. JBL Stage A120P is 45mm taller.
| General |
KEF Kube 10 MIE |
JBL Stage A120P |
| Brand |
KEF |
JBL |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
250 watts |
| Frequency Response |
20-140 Hz |
32-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
250-watt RMS |
| Watts Peak (Max) |
n/a |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Polypropylene |
Polycellulose |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
415.0mm (16.3") |
| Width |
353.0mm (13.9") |
393.0mm (15.5") |
| Depth |
370.0mm (14.6") |
475.0mm (18.7") |
| Weight |
15.40kg (33.9lbs) |
18.68kg (41.1lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | KEF Kube 10 MIE goes deeper - 20Hz against 32Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | evenly matched | Much the same amplifier (300W vs 250W RMS) - under 1dB apart. |
| Driver area | B | JBL Stage A120P moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | KEF Kube 10 MIE is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; JBL Stage A120P is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | KEF Kube 10 MIE takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only KEF Kube 10 MIE offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | KEF Kube 10 MIE is about 38% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | KEF Kube 10 MIE carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | JBL Stage A120P costs less - $300 against $799, about 62% less. |
A KEF Kube 10 MIE B JBL Stage A120P
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: KEF Kube 10 MIE measures better, JBL Stage A120P costs about 62% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, JBL Stage A120P will hit harder for the money; if it is mainly for music in a normal-sized room, KEF Kube 10 MIE is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, KEF Kube 10 MIE is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.