In this review, we will be comparing Kube 10 MIE and ASW610, two Powered Subwoofer speakers from KEF and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 10 MIE and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF Kube 10 MIEand B&W ASW610 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Kube 10 MIE has a frequency range of 20-140 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the Kube 10 MIE can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF Kube 10 MIE and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 10 MIE's and B&W ASW610's external dimensions. KEF Kube 10 MIE has external dimensions of 370 x 353 x 370 mm (14.6 x 13.9 x 14.6 in) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
B&W ASW610 is 41mm narrower and 49mm shorter than KEF Kube 10 MIE but it is also 24mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 10 MIE is approximately 1306.1cm2 / 202.4inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Kube 10 MIE requires 6% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 10 MIE weighs 15.40kg / 33.9lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Kube 10 MIE 23% heavier than the ASW610.
Here is a comparison of how Kube 10 MIE and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 10 MIE?
Here are the items that are included inside the box of Kube 10 MIE:
- Kube 10 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 Price per pair* |
799USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
321mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1306cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Near-identical footprints. B&W ASW610 stands 24mm further into the room. KEF Kube 10 MIE is 49mm taller.
| General |
KEF Kube 10 MIE |
Bowers & Wilkins ASW610 |
| Brand |
KEF |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
200 watts |
| Frequency Response |
20-140 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Polypropylene |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
321.0mm (12.6") |
| Width |
353.0mm (13.9") |
312.0mm (12.3") |
| Depth |
370.0mm (14.6") |
394.0mm (15.5") |
| Weight |
15.40kg (33.9lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | KEF Kube 10 MIE goes deeper - 20Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | KEF Kube 10 MIE has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Wireless option | depends | Only KEF Kube 10 MIE offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | B&W ASW610 is about 18% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | KEF Kube 10 MIE costs less - $799 against $899, about 11% less. |
A KEF Kube 10 MIE B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF Kube 10 MIE is the easier recommendation: it leads on most of the measured areas and costs less. Take B&W ASW610 if one of the "depends" rows describes your room.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.