In this review, we will be comparing KUBE 10b and Debut 2.0 SUB3030, two Powered Subwoofer speakers from KEF and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KUBE 10b and ELAC Debut 2.0 SUB3030 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the KEF KUBE 10b and ELAC Debut 2.0 SUB3030 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF KUBE 10band ELAC Debut 2.0 SUB3030 have a single woofer setup however the KEF KUBE 10b's woofer is 10-inch whereas the ELAC Debut 2.0 SUB3030 features a 12-inch woofer.
Frequency Response
KUBE 10b has a frequency range of 24-140 Hz whereas Debut 2.0 SUB3030 has a frequency range of 25-150 Hz. With a minimum frequency of 24Hz, the KUBE 10b can go slightly deeper then the Debut 2.0 SUB3030's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF KUBE 10b has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the ELAC Debut 2.0 SUB3030 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KUBE 10b's and ELAC Debut 2.0 SUB3030's external dimensions. KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm ( 14-5/8 x 14 x 15-5/8inch) whereas ELAC Debut 2.0 SUB3030 has external dimensions of 462.0 x 451.0 x 464.0mm ( 18-3/16 x 17-3/4 x 18-1/4inch) .
ELAC Debut 2.0 SUB3030 is clearly the larger of the two speakers. Its body is 95mm wider, 90mm taller and 67mm deeper than KEF KUBE 10b.
Below you can see the front view size comparison of KEF KUBE 10b and ELAC Debut 2.0 SUB3030 in scale.
Comparison image of KEF KUBE 10b and ELAC Debut 2.0 SUB3030 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2 and base area of the ELAC Debut 2.0 SUB3030 is approximately 2092.6cm2 / 324.4inch2. The KUBE 10b requires 32% less surface area than the Debut 2.0 SUB3030 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KUBE 10b weighs 17.50kg / 38.5lbs and the ELAC Debut 2.0 SUB3030 weighs 22.80kg / 50.2lbs. This makes the Debut 2.0 SUB3030 30% heavier than the KUBE 10b.
Here is a comparison of how KUBE 10b and Debut 2.0 SUB3030's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KUBE 10b?
Here are the items that are included inside the box of KUBE 10b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
What's in the Box of ELAC Debut 2.0 SUB3030?
Here are the items that come with the Debut 2.0 SUB3030:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Low Frequency Response |
24 Hz
vs
25 Hz
|
Generates deeper bass |
 Height |
372mm
vs
462mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1413cm2
vs
2092cm2
|
Takes less floor space |
 Price per pair* |
750USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
150k Hz
vs
140k Hz
|
Generates higher frequency |
| General |
KEF KUBE 10b |
ELAC Debut 2.0 SUB3030 |
| Brand |
KEF |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
500 watts |
| Frequency Response |
24-140 Hz |
25-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Not given |
Doped Paper |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
462.0mm (18.2") |
| Width |
356.0mm (14") |
451.0mm (17.8") |
| Depth |
397.0mm (15.6") |
464.0mm (18.3") |
| Weight |
17.50kg (38.5lbs) |
22.80kg (50.2lbs) |
| Enclosure |
Acoustic Suspension |
Passive radiator |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |