In this review, we will be comparing KUBE 10b and Sub 6, two Powered Subwoofer speakers from KEF and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KUBE 10b and Dynaudio Sub 6 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the KEF KUBE 10b and Dynaudio Sub 6 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF KUBE 10band Dynaudio Sub 6 have a single woofer setup however the KEF KUBE 10b's woofer is 10-inch whereas the Dynaudio Sub 6 features a 9.5-inch woofer.
Frequency Response
KUBE 10b has a frequency range of 24-140 Hz whereas Sub 6 has a frequency range of 16-230 Hz. With a minimum frequency of 16Hz, the Sub 6 can go significantly deeper on the low side and provide stronger bass compared to the KUBE 10b's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF KUBE 10b and Dynaudio Sub 6 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KUBE 10b's and Dynaudio Sub 6's external dimensions. KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm ( 14-5/8 x 14 x 15-5/8inch) whereas Dynaudio Sub 6 has external dimensions of 334.0 x 477.0 x 312.0mm ( 13-1/8 x 18-3/4 x 12-1/4inch) .
Dynaudio Sub 6 is 38mm shorter and 85mm less deeper than KEF KUBE 10b but it is also 121mm wider.
Below you can see the front view size comparison of KEF KUBE 10b and Dynaudio Sub 6 in scale.
Comparison image of KEF KUBE 10b and Dynaudio Sub 6 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2 and base area of the Dynaudio Sub 6 is approximately 1488.2cm2 / 230.7inch2. The KUBE 10b requires 5% less surface area than the Sub 6 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KUBE 10b weighs 17.50kg / 38.5lbs and the Dynaudio Sub 6 weighs 20.55kg / 45.2lbs. This makes the Sub 6 17% heavier than the KUBE 10b.
Here is a comparison of how KUBE 10b and Sub 6's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KUBE 10b?
Here are the items that are included inside the box of KUBE 10b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
What's in the Box of Dynaudio Sub 6?
Here are the items that come with the Sub 6:
Powered subwoofer2 Grilles6-feet AC power cord4 Rubber feet (pre-installed)4 Spike feet4 Hex-nuts4 Protective discsWrenchOwners ManualQuick Start GuideWarranty Extension CardWarning note
 Woofer Size |
10 inches
vs
9.5 inches
|
Larger woofer |
 Base Surface Area |
1413cm2
vs
1488cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Low Frequency Response |
16 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
230k Hz
vs
140k Hz
|
Generates higher frequency |
 Height |
334mm
vs
372mm
|
Easier to fit in smaller spaces |
| General |
KEF KUBE 10b |
Dynaudio Sub 6 |
| Brand |
KEF |
Dynaudio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
500 watts |
| Frequency Response |
24-140 Hz |
16-230 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
9.5" |
| Woofer Composition |
Not given |
Magnesium Silicate Polymer |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
front |
side |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
334.0mm (13.1") |
| Width |
356.0mm (14") |
477.0mm (18.8") |
| Depth |
397.0mm (15.6") |
312.0mm (12.3") |
| Weight |
17.50kg (38.5lbs) |
20.55kg (45.2lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |