In this review, we will be comparing KUBE 10b and DB3D, two Powered Subwoofer speakers from KEF and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KUBE 10b and B&W DB3D first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KUBE 10b and B&W DB3D have a totally different setup: the KEF KUBE 10b features 1 x 10-inch drivers whereas the DB3D features 2 x 8-inch drivers.
Frequency Response
KUBE 10b has a frequency range of 24-140 Hz whereas DB3D has a frequency range of 10-350Hz. With a minimum frequency of 10Hz, the DB3D can go significantly deeper on the low side and provide stronger bass compared to the KUBE 10b's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both KEF KUBE 10b and B&W DB3D have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KUBE 10b's and B&W DB3D's external dimensions. KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm (14-5/8 x 14 x 15-5/8inch) whereas B&W DB3D has external dimensions of 368.3 x 341.3 x 347.7mm ().
KEF KUBE 10b is clearly the larger of the two speakers. Its body is 14.7mm wider, 3.7mm taller and 49.3mm deeper than B&W DB3D.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2 and base area of the B&W DB3D is approximately 1186.7cm2 / 183.9inch2. The KUBE 10b requires 19% more surface area than the DB3D which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KUBE 10b weighs 17.50kg / 38.5lbs and the B&W DB3D weighs 25.05kg / 55.1lbs. This makes the DB3D 43% heavier than the KUBE 10b.
Here is a comparison of how KUBE 10b and DB3D's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KUBE 10b?
Here are the items that are included inside the box of KUBE 10b:
- Powered subwoofer
- 6.5-feet AC power cord
- Speaker-level input block
- User Manual
- Important Safety Information
- Warranty Information
What's in the Box of B&W DB3D?
Here are the items that come with the DB3D:
- Powered subwoofer
- 2 Grilles
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
 Price per pair* |
750USD
vs
3499USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
10 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
140 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
368mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1186cm2
vs
1413cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
KEF KUBE 10b needs about 19% more floor area. KEF KUBE 10b stands 49mm further into the room.
| General |
KEF KUBE 10b |
Bowers & Wilkins DB3D |
| Brand |
KEF |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
1000 watts |
| Frequency Response |
24-140 Hz |
10-350Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
|
|
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
front |
n/a |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
368.3mm (14.5") |
| Width |
356.0mm (14") |
341.3mm (13.4") |
| Depth |
397.0mm (15.6") |
347.7mm (13.7") |
| Weight |
17.50kg (38.5lbs) |
25.05kg (55.1lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
Different price classes - B&W DB3D costs roughly 4.7x what KEF KUBE 10b does. Before paying it, read the note below about two smaller subwoofers.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB3D goes deeper - 10Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB3D has the bigger amplifier - 1000W against 300W RMS, about 5.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W DB3D moves more air: 2 x 8" against 10" is 1.28x the cone area, not the 1.13x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W DB3D is about 17% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | KEF KUBE 10b costs less - $750 against $3,499, about 79% less. |
A KEF KUBE 10b B B&W DB3D
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W DB3D measures better, KEF KUBE 10b costs about 79% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $750 each, two KEF KUBE 10b cost about $1,500 against $3,499 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.